Professor Jamal Khatib

Professor Jamal Khatib

Chair in Civil Engineering

  • Email address j.m.khatib@wlv.ac.uk
  • Phone number 01902 518588
  • Faculty Faculty of Science and Engineering
  • Institute School of Architecture and Built Environment
  • Areas of expertise
    • Sustainable construction materials in:
      • Concrete
      • Pavement
      • Masonry
      • Rammed Earth (Adobe)
      • Soil stabilisation)

                                                                       

    • Structural materials

     

    • Using waste in construction (Coal fly ash; Flue Gas Desulphurisation (FGD); Silica fume; Slag; Municipal solid waste incineration bottom ash (MSWI-BA); Sludge (e.g. sewage); recycled concrete; recycled glass; recycled brick, ground brick, foam glass, foundry sand; waste rubber (e.g. rubber tyre); waste plastic; Waste polystyrene)

     

    • Lightweight aggregate (e.g. expanded clay, expanded polystyrene)

     

    • Novel materials in construction (metakaolin-calcined clay,hybrid/composite materials, novel light-weight aggregates, alkali activation of pozzolans (non-cement based);

     

    • Novel admixtures-(EU supported project) for self-compacting concrete

Jamal Khatib, BEng, MEng(Sc), PhD,  CEng, EUR ING, FICE, FHEA, PG.Cert. Ed, PG.Cert. PjtMgt, Cert. EnvMgt, MIEI(till 2015), MEPC, MIRED, SMUACSEE, MOIA, is Emeritus Professor of the University of Wolverhampton (UoW) – UK. His academic career began in 1987 as a Research Student/Assistant/Fellow, at the  University of Aberdeen. In 1994 he moved to take another Research Fellow post at the University of South Wales (USW) until 1997. He then took a permanent position as a Lecturer/Senior Lecturer in Civil Engineering at Sheffield Hallam University (SHU). During that time and due to research collaboration with IMUST-China, he was awarded the title of Honorary Professor in 2001. After 9 years at SHU, he moved to the UoW as a Reader in Civil Engineering and became a Professor in July 2012. He achieved the Chartered Engineer status of the Institution of Civil Engineer (ICE) in 2010, the European Engineer status (EUR ING) in 2015 and the Fellowship status of the ICE in 2016. Areas of research specialism include a number of sustainable construction materials themes: a) use of waste in the production of construction materials, b) novel construction materials (e.g. metakaolin), c) concrete subjected to harsh environments, d) lightweight and self-compacting concrete and e) behaviour of structural materials. Prof Khatib was one of the early UK researchers who conducted research on metakaolin as partial substitution of cement and his publications in this area have been extensively cited. The products of his extensive research activities have been comprehensively disseminated through: over 600 refereed academic journal & conference papers, text books, abstracts, research seminars and workshops; articles and features. According to the ISI Web of Science, Scopus and Google Scholar Prof Khatib has an H-index of 29, 33 and 43 respectively.  According to a study conducted by Stanford University in October 2020, October 2021, October 2022 and October 2023, Prof Khatib was classified as one of the top 2% researchers (actually top 0.25%) in the world in the building & construction field (https://data.mendeley.com/datasets/btchxktzyw/2). Microsoft Academic classified Prof Khatib as one of one of the top authors in cement (G-Index:18). According to Google scholar Prof Khatib has over 11,000 citations and many of his papers were ranked as the top 25 articles. He acts as a reviewer to 250 international academic journals, book publishers & others. He sits on the technical committees of over 100 international conferences. Publons classified Prof Khatib as one of the top reviewers globally. He is an Editorial Board member of 10 academic Journals including the Editor-in-Chief and Associate Editor roles. Prof Khatib was a submitting member for the RAE/REF 1996 (USW), 2001 (SHU) & 2008/2014 (UoW).

 

Prof Khatib is a recipient of research funding from the European Union (EU), the British Council, The Institution of Structural Engineers and the Royal Society. He established strong research links with Universities across the world; China, Algeria, India, Iraq, Turkey; Nigeria, Kazakhstan, Iraq, Ukraine, US, Canada, France, Finland, Portugal, Slovenia, South Africa, Lebanon, Nigeria, KSA  & Australia.

https://scholar.google.com/citations?user=eRDOWn8AAAAJ&hl=en

 

 

 

Research and Consultancy are in the broad field of Sustainable Construction/Structural Materials. Expertise includes the utilisation of waste/recycled and novel materials in cement based systems to produce construction materials (e.g. concrete, pavement). Waste comprises industrial by-products (e.g. fly ash, silica fume, slag, desulphurised waste-FGD), demolition waste (e.g. recycled brick, recycled concrete, ground brick, foamed glass), municipal solid waste incineration bottom ash (MSWI-BA), sludges (e.g. sewage). Novel materials include metakaolin (calcined clay), hybrid/composite materials, novel light-weight aggregates, alkali activation of pozzolans and geopolymers. Prof Khatib was one of the early UK researchers to study the effect of metakaolin on the performance of cement based materials. Published work on metakaolin has been widely cited.

Other consultancy/research expertise includes Lime Stabilisation of Soils, utilisation of industrial by-products to stabilise contaminated soils, Environmental Assessment of Soil & Construction Materials containing waste (e.g. MSWI-BA) and Rammed Earth. Structural Assessment and Performance of Building Materials form integral parts of this work. Prediction and modeling of thermal induced cracking in reinforced concrete structures is another area of research. Research interests are also in the use of waste/recycled materials in Pavement Engineering. Other research activities include Construction Project Management.

Research involves the study of mechanical and durability properties. These include, strength (e.g. compressive, flexural), non-destructive testing, chemical attack, prediction of chloride penetration into concrete and its effect on reinforcement corrosion, carbonation, porosity and pore size distribution, capillary water absorption, shrinkage (e.g.  chemical, plastic, autogenous) using novel techniques, product of hydration using TG analysis, leaching characteristics of heavy elements and others (i.e. environmental impact).

The above research focuses on the utilisation of waste/recycled materials in producing high grade construction materials and this is in line with the government (and global) agenda to reduce CO2 emission, which rises the potential for research funding.

 

Prof Khatib has more than 600 publications and 11,000 citations, google h-index of 48 and an i-10 index of 156.  http://scholar.google.com/citations?hl=en&user=eRDOWn8AAAAJ&view_op=list_works&pagesize=100    . He has over 20 PhD completions, currently supervising 6 PhDs and has examined over 60 PhD students.

 

Research Projects

 1.         The durability of mortar with ground clay brick as partial cement replacement

 2.         Properties of concrete containing desulphurised waste

 3.         Leaching behaviour, mechanical and durability properties of mortar containing municipal incineration bottom ash

 4.         Bond strength performance characteristics of brick-mortar interfaces

 5.         Developments in aggregate recycling with bitumen emulsion and hydraulic binders for roads

 6.         Stabilisation of metal contaminated solutions and soils using blended binders derived from waste materials

 7.         Image scanning technique for the determination of concrete pores

 8.         Production of light-weight concrete materials made of treated sustainable light-weight aggregates

 9.         Raw sewage sludge utilisation in construction applications: Engineering and environmental performance

 10.      Novel manufacturing and properties of composite rammed earth blocks

 11.      Characterisation of shape of fine recycled crushed coloured glass and the effect on the properties of structural concrete when used as a fine aggregate replacement

 12.      Environmental impact of using municipal solid waste incineration ash in construction

 13.      Prediction of early thermal cracking of reinforced concrete structures

 14.      Modelling and properties of rammed earth as construction  materials

 15.      Purification of contaminated soil from crude oil spill in Iraq and the use of zeolites as a remediation tool

 16.      The applicability of recycled waste paper as lightweight building materials

 17.      Waste plastic/rubber in construction

 18.      Metakaolin utilisation in cementitious materials

 19.      Novel chemical admixtures from waste products for concrete applications

 20.      Recycled aggregate usage

University of Wolverhampton

 

BEng, MEng(Sc), PhD, HonProf(IMUST),CEng, EUR ING, FICE, FHEA, MIEI (till 2015), MOIA, MEPC, MIRED, SMUACSE, PGCert-Ed, PGCert-PjtMgt, Cert-EnvMgt.

 

 

2001

 

Honorary Professor - Awarded by the Inner Mongolia University of Science and Technology, China

 

2015

 

Visiting Professor – University of La Rochelle, France, June/July 2015

 

2018

 

Visiting Professor – Shanghai Jin Tao University, China

 

2010

 

Chartered Engineer (CEng) (Reg. No. 584160), Member of the Institution of Civil Engineers (MICE) - UK.

 

2016

 

Fellow of the Institution of Civil Engineer (FICE) – UK

 

2007

 

Fellow of the Higher Education Academy (FHEA) - UK.

 

2002-2015

 

Chartered Engineer (CEng), Member of the Institution of Engineers of Ireland (MIEI)

 

2021

 

Member of the EPSRC Associate Peer Review College

 

1984

 

Member of the “ Ordre des Ingenieurs et Architects”- Liban.

 

2013

 

Member of the Engineering Professors’ Council – UK

 

2015

 

European Engineer (EUR ING), European Federation of National Engineering Associations (FEANI)

 

2015

 

Member of the Institute of Research Engineers and Doctors (IRED), www.theired.org

Senior Member of the Universal Association of Civil, Structural &  Environmental Engineers     

 
 

ACADEMIC QUALIFICATIONS

 

1987-1991

 

PhD, Construction/Structural Materials, University of Aberdeen - UK.

 

1985-1986

 

MSc (taught course), Structural Engineering, University of Liverpool – UK

 

1978-1983

 

BEng, Civil/Structural Engineering, BAU – Lebanon

 

1997-1999

 

Postgraduate Certificate in Teaching and Learning in Further and Higher Education - Sheffield Hallam University - UK

 

2005-2007      

 

Postgraduate Certificate in Project Management with Distinction, Sheffield Hallam University – UK

1996-1997      

 

 

Certificate in Environment Management System-Institute of Quality Assurance - UK
 

 

P S Mangat and J M el-Khatib (1992) “Influence of Initial Curing on Sulphate Resistance of blended Cement Concrete”, Cement and Concrete Research Journal, Vol. 22, No. 6, November 1992, pp1089-1100. ISSN: 0008-8846 

[Cited 83 times google scholar]

 

P S Mangat, J M el-Khatib and B T Molloy (1994) “Microstructure, Chloride Diffusion and Reinforcement Corrosion in Blended Paste and Concrete”, Journal of Cement and Concrete Composites, Vol.16, 1994, pp 73-81. ISSN:  0958-9456    

[Cited 60 times google scholar]  

 

S Wild, M Hadi and J M Khatib (1995) “The Influence of Gypsum Content on the Porosity and Pore Size Distribution of Cured PFA-Lime Mixes”, Advances in Cement Research Journal, Vol.7, No.26, Apr 1995, pp 47-55. ISSN:  0951-7197       

 

P S Mangat and J M Khatib (1995) “Influence of Fly Ash, Silica Fume and Slag on Sulphate Resistance of Concrete”, American Concrete Institute-Materials Journal, Vol.92, No.5, 1995, pp 542-552.

[Cited 109 times google scholar]      

 

J M Khatib and P S Mangat (1995) “Absorption Characteristics of Concrete as a Function of Location Relative to the Casting Position”,  Cement and Concrete Research Journal, Vol.25, No.5,  July 1995, pp 999-1010. ISSN: 0008-8846

[Cited 81 times google scholar]    

 

S Wild, B B Sabir and J M Khatib (1995) “Factors Influencing Strength Development of Concrete Containing Silica Fume”, Cement and Concrete Research Journal, Vol.25, No.7, September 1995, pp 1567-1580. ISSN: 0008-8846

[Cited 109 times google scholar]     

 

 

S Wild, J M Khatib and A Jones (1996) “Relative Strength, Pozzolanic Activity and Cement Hydration in Superplasticised Metakaolin Concrete”, Cement and Concrete Research Journal, Vol.16, No.10, 1996, pp 1537-1544. ISSN: 0008-8846  

[Cited 618 times google scholar]         

 

J M Khatib and S Wild (1996) “Pore Size Distribution of Metakaolin Paste”, Cement and Concrete Research Journal. Vol.26, No.10, 1996, pp 1545-1553. ISSN: 0008-8846       

[Cited 327 times google scholar]    

 

S Wild and J M Khatib (1997) “Portlandite Consumption in Metakaolin Cement Pastes and Mortars”,  Cement and Concrete Research Journal. Vol.27, No.1, 1997, pp 137-146. ISSN: 0008-8846       

[Cited 212 times google scholar]   

 

S Wild , J M Khatib and M O’Farrell (1997) “Sulphate Resistance of Mortar Containing Ground Brick Clay Calcined at Different Temperatures”, Cement and Concrete Research Journal, Vol.27, No.5, 1997, pp 697-709. ISSN: 0008-8846      

[Cited 63 times google scholar]

 

J M Khatib and S Wild (1998) “Sulphate Resistance of Metakaolin Mortar”, Cement and Concrete Research Journal, 1998, Vol. 28, No. 1, pp 83-92. ISSN: 0008-8846       

[Cited 195 times google scholar]  

 

S Wild, J M Khatib and L Roose (1998) “Chemical and Autogenous Shrinkage of Metakaolin Paste”, Advances in Cement Research Journal, 1998, Vol 10, No 3, 1998, pp 1-11. ISSN:  0951-7197            

[Cited 97  times google scholar]  

 

J M Khatib and P S Mangat (1999) “Influence of Superplasticiser and Curing on Porosity and Pore Structure of Cement Paste”, Journal of Cement and Concrete Composites, December 1999, Vol. 21, pp 431-437.   ISSN:  0958-9456    

[Cited 93 times google scholar]    

 

J M Khatib and P S Mangat (2000) “Porosity and Pore Size Distribution of Cement Paste Exposed to Different Curing Regimes – Influence of Superplasticizer”, L’industria Italiana del Cemento Journal, No. 750 – iiC,   January 2000, pp 76 – 83.

 

J M Khatib and P S Mangat (2002) “Influence of High Temperature and Low Humidity Curing on Chloride Penetration in Blended Cement Concrete”, Cement and Concrete Research Journal, Vol 32, No. 11, 2002, pp 1743-1753. ISSN: 0008-8846

[Cited 65 times google scholar]

 

J M Khatib and P S Mangat (2003) “Porosity of Cement Paste Cured at 45°C as a Function of Location Relative to Casting Position”, Journal of Cement and Concrete Composites, Vol 25, No 1,  2003, pp 97-108.

[Cited 52 times google scholar]

 

J M Khatib and P S Mangat (2003), A reply to the discussion by M. Collepardi of the paper, “Influence of High Temperature and Low Humidity Curing on Chloride Penetration in Blended Cement Concrete”, Cement and Concrete Research Journal , Vol. 33, 2003, pp 1705-1706. ISSN: 0008-8846         doi: 10.1016/S0008-8846(03)00134-0

 

J M Khatib and R Clay (2004) “Absorption Characteristics of Metakaolin Concrete”, Cement and Concrete Research Journal, Vol. 34, No. 1, 2004, pp 19-29. ISSN: 0008-8846         doi: 10.1016/S0008-8846(03)00188-1    

[Cited 188 times google scholar]   

 

J M Khatib (2005) “Properties of Concrete Containing Fine Recycled Aggregates”, Cement and Concrete Research Journal, Vol. 35, No. 4, April 2005, pp 763-769. ISSN: 0008-8846        doi: 10.1016/j.cemconres.2004.06.017         

[Top 25 articles; 13/25 Oct-Dec05 5/25 Apr-Jun05]  [Cited 614 times google scholar]      

 

J M Khatib and J J Hibbert  (2005) “Selected Engineering Properties of Concrete Incorporating Slag and Metakaolin”, Construction and Building Materials Journal, Vol. 19, No. 6, July 2005, pp 460-472. ISSN 0950-0618  doi: 10.1016/j.conbuildmat.2004.07.017   

[Top 25 articles; 15/25 Oct-Dec05 5/25 Apr-Jun05] [Cited 215 times google scholar]  

 

J Zhang, J M Khatib, C Yan (2006) “The Study of Mechanical and Durability Properties of Bricks Made with Different Fly Ashes”, New Building Materials Journal, In Chinese, June 2006, pp 17-21.

 

P S Mangat, J M Khatib and L Wright (2006) "Optimum Utilisation of Flue Gas Desulphurisation (FGD) Waste in Blended Binder for Concrete", Construction Materials Journal - Proceedings of the Institution of Civil Engineers. Vol 1, No. 2, August 2006, pp 60-68. ISNN 1747-650X     

 

J M Khatib and A Blagden (2006) "Has Adjudication been Accepted as an Effective Form of Dispute Resolution within the UK Construction Industry", Construction Information Quarterly Journal , CIOB, December 2006, Issue 4, pp 181-184.

 

J M Khatib, N. Chileshe, S. Sloan (2007) “Antecedents and Benefits of 3D and 4D Modelling for Construction Planners”, Journal of Engineering, Design and Technology, 2007, Vol 5, Issue 2, pp 159-172. ISSN: 1726-0531, DOI: 10.1108/17260530710833202

 

A.O. Coker, R.A. Adeshiyan, J.R. Oluremi, M.K. Sridhar, M.E. Coker, C.A. Booth and J M Khatib (2008) “Challenges of Waste and Facilities Management in a Nigerian Leper Colony”,   International Journal of Environmental Studies, April 2008, Vol 65, No. 2, pp 177-189. ISSN 0020-7233 print    ISSN 1029-0400 online  doi: 10.1080/00207230701831202        

 

J M Khatib (2008) “Metakaolin Concrete at a Low Water to Binder Ratio”, Construction and Building Materials Journal, August 2008, Vol 22, Issue 8, pp 1691-1700. ISSN 0950-0618                    doi: 10.1016/j.conbuildmat.2007.06.003

[Cited 96 times google scholar]

 

J M Khatib (2008) “Performance of Self-Compacting Concrete Containing Fly Ash”, Construction and Building Materials Journal, September 2008, Vol 22, Issue 9, pp 1963-1971. ISSN 0950-0618                   doi: 10.1016/j.conbuildmat.2007.07.011                       

[Top 25 articles; 3/25 Jul-Sep08, 5/25 Apr-Jun08, 11/25 Oct-Dec07] [Cited  317 times google scholar]

O Kayali, M Naseer Haque, J M Khatib (2008) “Sustainability and Emerging Concrete Materials and their Relevance to the Middle East”, The Open Construction and Building Technology Journal, Vol 2, 2008, pp 103-110, ISSN: 1874-8368

 

R Siddique, J M Khatib and I Kaur (2008) “Use of Waste Recycled Plastic in Concrete: A review”, Journal of Waste Management, Vol 28, No 10, 2008, pp 1835-1852, ISSN 0956-053X          doi: 10.1016/j.wasman.2007.09.011    

[Top 25 articles; 1/25 Jul-Sep08, 3/25 Oct-Dec08] [Cited 677 times google scholar]

 

J M Khatib, P S Mangat and L Wright (2008) "Sulphate Resistance of Blended Binders Containing FGD Waste ", Construction Materials Journal - Proceedings of the Institution of Civil Engineers (ICE), Vol 161, Issue CM3, August 2008, pp 119-128.   ISNN 1747-650X      doi: 10.1680/coma.2008.161.3.119

 

J Zhang and J M Khatib (2008) “Using wheat husk ash in the production of a sustainable construction material”, Real Estate and Development Economics Research (READER) Journal, Vol. 1, No. 1, pp 18-29, September, 2008, print ISSN 1754-3517    online ISSN   1754-3525   CDROM  ISSN   1754-3533

[Cited 11 times google scholar]

 

B Medani, S Kenai,  J M Khatib and A Ait-Mokhtar (2009) “Strength and Durability of Concrete Incorporating Crushed Limestone Sand”, Construction and Building Materials Journal, February 2009, Vol 23, Issue 2, pp 625-633 ISSN 0950-0618,   doi:10.1016/j.conbuildmat.2008.02.005

[Top 25 articles; 8/25 Oct-Dec08] [Cited 100 times google scholar]

http://top25.sciencedirect.com/subject/engineering/12/journal/construction-and-building-materials/09500618/archive/20/

 

J M Khatib (2009) "Low curing Temperature of Metakaolin Concrete", American Society of Civil Engineers (ASCE) - Materials in Civil Engineering Journal, Vol 21, No. 8, August, pp 362-367, ISSN 0899-1561/2009/8-362-367    DOI: 10.1061/(ASCE)0899-1561(2009)21:8(362)

[Cited 30 times google scholar]

 

J M Khatib,  O Kayali and R Siddique (2009) “Dimensional Stability and Strength of Cement-Fly Ash-Metakaolin Mortar”, American Society of Civil Engineers (ASCE) - Materials in Civil Engineering Journal, Vol. 21, No. 9, September, pp 523-528, ISSN 0899-1561/2009/9-523-528, DOI: 10.1061/(ASCE)0899-1561(2009)21:9(523), CODEN: JMCEE7

 

R Siddique and J M Khatib (2010) “Abrasion Resistance and Mechanical properties of HVFA Concrete”, Materials and Structures - RILEM Journal,  Vol 43, No 5, June 2010, pp 709-718. print ISSN: 1359-5997   online ISSN 1871-6873        doi: 10.1617/s11527-009-9523-x

[Cited 40 times google scholar]

 

E M Negim, M Ramli, J M Khatib, B Saad, M I Saleh (2010), “Synthesis and Characterization of Hydrophilic Copolymers as Superplaticizers for cement Pastes”, World Applied Sciences Journal, Vol 10, No 6, pp 685-694. ISSN  : 1818-4952    http://idosi.org/wasj/wasj.htm

 

G True, D Searle, L Sear, J M Khatib (2010), “Voidage Assessment of Concrete Using Digital Image Processing”, Magazine of Concrete Research, Vol 62, No. 12, December, pp 857-868, ISSN 0024-9831, doi: 10.1680/macr.2010.62.12.857

 

J M Khatib, B A Herki (2011), “Capillary Water Absorption of Concrete Containing Waste Foundry Sand”, Concrete Plant International (CPI) Magazine, October, No. 5, pp 50-53, ISSN 1437-9023, www.cpi-worldwide.net

 

E M Negim, M Ramli, B Saad J M Khatib, L Bekbayeva, M Shalash, M I Saleh (2011), “Effect of Acrylate Copolymers on the Rheological Properties of Cement Pastes, Part II”, Middle-East Journal of Scientific Research, Vol 9, No 1, pp 8-16. ISSN  : 1990-9233    http://www.wassj.org           www. Idosi.org

 

J M Khatib, B A Herki, S Firat, B Menadi, S Kenai (2011), “Capillarity of Concrete Incorporating Foundry Sand a Replacement of Sand”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4,  pp 1224-1230, ISSN:1306-3111, ISSN: 1308-7231,  Article No. 1A0203, www.newwsa.com.

 

J M Khatib, L Wright and P S Mangat (2011), “External Chemical Shrinkage of Pastes Containing Flue Gas Desulphurisation (FGD) Waste”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4,  pp 1669-1675, ISSN:1306-3111, ISSN: 1308-7231,  Article No. 1A0272, www.newwsa.com.

 

J M Khatib, L Wright and P S Mangat (2011), “Influence of Incorporating Flue Gas Desulphurisation (FGD) Residues on Porosity and Pore Size Distribution of Cement Paste”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4,  pp 1676-1682, ISSN:1306-3111, ISSN: 1308-7231,  Article No. 1A0273, www.newwsa.com.

 

A O Coker, J R Oluremi, R A Adeshiyan, M K Sridhar, M E Coker, C A Booth, J A Millington, J M Khatib (2011), “Wastewater Management in a Nigerian Colony”, Journal of Environmental Engineering and Landscape Management, Vol 19, Issue 3, 2011, pp 260-269, DOI: 10.3846/16486897.2011.603500,  ISSN 1648-6897   ISSN 1822-4199 online,

 

J M Khatib, A Shaaban, S Negim, S Kenai (2011), “The Capillarity of Self-Compacting Concrete Incorporating Fly Ash”, Journal of Concrete Plant International, South African Journal for the Concrete Industry, pp54-60, Issue 6 (December), ISSN 1437-9023, www.cpi-worldwide.net

 

J M Khatib, S Negim, M Tarek Uddin (2012), “New Generation Water-Reducing Admixture for Concrete”,  The Master Builder, Indian Premier Construction Magazine, Vol 14, No 1, pp 142-149, January 2012, http://www.masterbuilder.co.in/

 

J M Khatib, S Baig, A Bougara, E S Negim, S Kenai (2012), “Utilisation of Foundry Sand in Concrete Production”,  The Master Builder, Indian Premier Construction Magazine, Vol 14, No 1, pp 244-246, January 2012, http://www.masterbuilder.co.in/

 

A Hadjsadok, S Kenai, L Courard, F Michel and J M Khatib (2012), “Durability of Mortar and Concretes Containing Slag with Low Hydraulic Activity”, Journal of Cement and Concrete Composites, Vol 34, Issue 5, May 2012, pp 671-677, ISSN 0958-9465. doi:10.1016/j.cemconcomp.2012.02.011

 

E M Negim, J M Khatib, K Al Mutairi, R Raikhan, M A Grigoriy (2012), “The Effect of Molar ratios of the Monomers on the Physico-Mechanical Properties of Portland Cement”, Middle-East Journal of Scientific Research, Vol 11, No 8, pp 1131-1139. ISSN  : 1990-9233    http://www.wassj.org           www. Idosi.org

 

J M Khatib, S Shariff, ES M Negim (2012), “Effect of Incorporating Foamed glass on the Flexural Behaviour of Reinforced Concrete Beams”, World Applied Sciences Journal, Vol 19, No 1, pp 47-51, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2012.19.01.2763

 

 

E S Negim, J M Khatib, M M Mohammed, S K Kerimbaevna (2012), “The Effect of Molar ratios of the Monomers on the Physico-Mechanical Properties of Portland Cement Mortar”, World Applied Sciences Journal, Vol 19, No 6, pp 832-837. ISSN 1818-4952, DOI: 10-5829/idosi.wasj.2012.19.06.2773

 

J M Khatib, L Wright, P S Mangat, E M Negim (2012), “Porosity and Pore Size Distribution of Well Hydrated Cement-Fly Ash- Gypsum Pastes”, American-Eurasian Journal of Scientific Research, Vol 7, No 4, pp 142-145. ISSN 1818-6785,   DOI: 10.5829/idosi.aejsr.2012.7.4.65131 

 

J M Khatib, E M Negim, H S Sohl, N Chileshe (2012), Glass Powder Utilisation in Concrete Production, European Journal of Applied Sciences, Vol 4, No 4, pp 173-176, ISSN 2079-2077, DOI; 10.5829/idosi.ejas.2012.4.4.1102

 

J M Khatib, E M Negim, E Gjonbalaj (2012), “High Volume Metakaolin as cement Replacement in Mortar”, World Journal of Chemistry, Vol 7, No 1, pp 7-10, DOI: 10.5829/idosi.wjc.2012.7.1.251    http://idosi.org/wjc/7(1)12/2.pdf

 

N Chileshe, J M  Khatib and M Farah (2013),  “The Perceptions of Tenants in the Refurbishment of Tower Blocks”, Facilities Journal, Emerald Publishing, Vol 31, Issue 3-4, pp 119-137.  ISSN: 0263-2772   DOI: 10.1108/02632771311299403

 

A B Herki, J M Khatib, E M Negim (2013), “Lightweight Concrete Made from Waste Polystyrene and Fly Ash”,  World Applied Sciences Journal, Vol 21, No 9, pp 1356-1360, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2013.21.9.20213

 

C Egenti, JM Khatib, D Oloke (2013), “Appropriate Design and Construction of Earth Buildings: Contesting Issues of Protection Against Cost”, African Journal of Basic & Applied Sciences, Vol 5, No 2, pp 102-106, ISSN 2079-2034    DOI: 10. 5829/idosi.ajbas.2013.5.2.1130

 

J M Khatib, L Wright, P S Mangat (2013), “Effect of fly ash-gypsum blend on porosity and pore size distribution of cement pastes”, Journal of Advances in Applied Ceramics, Structural, Functional and Bioceramics, Vol 112, No. 4, pp 197-201, online, ISSN 17436753, DOI: 10.1179/1743676112Y.0000000032

 

E M Negim, J M Khatib, N O Inkarbekov (2013), “Effect of Acrylate Copolymers on the Rheological Properties of Cement Pastes, Part III”, World Applied Science Journal, Vol 23, No 4, pp 549-553.  ISSN  : 1818-4952    DOI: 10.5829/idosi.wasj.2013.23.04.13084

 

J M Khatib, A B Herki, S Kenai (2013), “Capillarity of Concrete Containing Foundry Sand”, Journal of Construction and Building Materials, Vol 47, October, pp 867-871, Elsevier http://dx.doi.org/10.1016/j.conbuildmat.2013.05.013,

[Cited 11 times google scholar]

 

B.A. Herki, J.M. Khatib  (2013)  “Lightweight Concrete Incorporating Waste Expanded Polystyrene”, Advanced Materials Research Journal,  Vol. 787, pp 131-137, Trans Tech Publications, Switzerland, Online: 2013-09-04, ISBN print: 978-3-03785-802-8, doi:10.4028/www.scientific.net/AMR.787.131 

 

N Chileshe, J M Khatib and M Farah (2013), “The perceptions of Contractor’s and Landlord’s Representatives in the refurbishment of Tower Blocks”, Facilities Journal, Emerald Group Publishing, Vol 31, No. 11/12, pp 521-541, ISSN: 0263-2772   DOI: 10.1108/F-02-2012-0008

 

E S M Negim, J M Khatib, E Faizova, S Shilibekov, S Mussylmanbek (2013), “The Effect of Diamine Extender on the Properties of Polyurethane Dispersions”, Middle-East Journal of Scientific Research, Vol 16, No 7, pp 890-895, www.idosi.org ISSN 1990-9233 DOI: 10.5829/idosi.mejsr.2013.16.07.11936

 

E S M Negim, J M Khatib, G Zh Yeligbayeva, R Rakhmetullayeva, P I Urkimbaeva, M Sakhy, S Shilibekov, G A Mun, (2013), “Synthesis, Characterization and Application of Hydrophilic Copolymers on Physico-mechanical Properties of Cement Pastes”, World Applied Sciences Journal, Vol 25, No. 5, pp 1044-1052, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2013.25.07.13379    

 

J M Khatib, P S Mangat, L Wright (2013), “Early Age Porosity and Pore Size Distribution of Cement paste with Flue Gas Desulphurisation (FGD) Waste”, Journal of Civil Engineering and Management, Vol 19, No 5, pp 622-627, Taylor and Francis,  ISSN 1392-3730 print/ISSN 1822-3605 online,    doi: 10.3846/13923730.2013.793609 

 

M Sonebi, W Schmidt, J M Khatib (2013), “Influence of the Type of Viscosity-modifying Admixtures and Metakaolin on the Rheology of Grouts”, Chemistry and Materials Research Journal, Vol 5, pp 106-111. ISSN 2225-0956   http://www.iiste.org/Journals/index.php/CMR/index

 

B Menadi, S Kenai and J M Khatib (2014), “Fracture Behaviour of Concrete Containing Limestone Fines”, Proceedings of the ICE; Construction Materials Journal -, Vol 167, Issue 3, pp 162-170, June 2014, Paper 1200041 DOI: 10.1680/coma.12.00041.

 

S Kenai, B Menadi and J M Khatib (2014), “Sustainable Construction and Low Carbon Dioxide Concrete: Algeria Case Review”, Proceedings of the ICE; Engineering Sustainability Journal. Vol 167, Issue 2, pp 45-52, April 2014,      ISSN: 1478-4629         DOI: 10.1680/ensu.12.00024

 

J M Khatib (2014), “Effect of Initial Curing on Absorption and Pore Size Distribution of Paste and Concrete Containing Slag”, Korean Society of Civil Engineers (KSCE) Journal , Vol 18, Issue 1, pp 264-272 January. pISSN 1226-7988, eISSN 1976-3808       DOI 10.1007/s12205-014-0449-7

 

N Zhansaya, E S M Negim,  A M Rauash, J M   Khatib, G A Mun, C Williams (2014), Effect of pH on the physico-mechanical properties and miscibility of MC/PAA blends,  Carbohydrate Polymers Journal,  Elsevier, Vol 101, pp 415-422, http://dx.doi.org/10.1016/j.carbpol.2013.09.047

 

El-Sayed M. Negim, J.M. Khatib, M. Sakhy, S. Shilibekov, N. Shanshabayev, B. Jakiyayev (2014), “The Effect of pH on Physico-Mechanical Properties of Cement Pastes Containing Poly (Acrylate) Latexes -Chemical Admixtures”, World Applied Sciences Journal, Vol 29, No 6, pp 796-804, ISSN 1818-4952

 

B Menadi, S Kenai, S Hammat, J M Khatib (2014), “The Influence of the Fineness of Mineral Additions on Strength and Drying Shrinkage of Self-Compacting Mortars”, Key Engineering Materials Journal,  Vol. 600, pp 367-374, Trans Tech Publications, Switzerland, ISSN: 1662-9795    doi:10.4028/www.scientific.net/KEM.600.367

J M Khatib, E M Negim, G Zh Yeligbayeva, G A Mun (2014), “Strength characteristics of mortar containing high volume metakaolin as cement replacement”, Research and Reviews in Materials Science and Chemistry Journal, Vol 3, Issue 1, pp 85-95, Jyoti Academic Press, ISSN: 2319-6920,  www.jyotiacademicpress.net

 

J M Khatib, P S Mangat, L Wright (2014), “Pore Size Distribution of Cement pastes Containing Fly Ash-Gypsum Blends Cured for 7 Days”, Korean Society of Civil Engineering (KSCE) Journal, Vol 18, No 4, pp 1091-1096,; DOI: 10.1007/s12205-014-0136-8        Online ISSN: 1976-3808; Print ISSN: 1226-7988

 

El-Sayed Negim, Latipa Kozhamzharova, Jamal Khatib, Lyazzat Bekbayeva, and Craig Williams (2014), “Effects of Surfactants on the Properties of Mortar Containing Styrene/Methacrylate Superplasticizer,” The Scientific World Journal, Vol. 2014, Article ID 942978, 10 pages. doi:10.1155/2014/942978

 

D Boucherit, S Kenai, E Kadri, J M Khatib (2014), “A Simplified Approach for the Prediction of Long Term Concrete Drying Shrinkage”, Korean Society of Civil Engineering (KSCE) Journal, Vol 18, No. 4, pp 2196-2208,                   DOI: 10.1007/s12205-014-0168-0             Online ISSN: 1976-3808; Print ISSN: 1226-7988

 

C Egenti, J M Khatib, D Oloke (2014), “Conceptualisation and Pilot Study of Shelled Compressed Earth Block for Sustainable Housing in Nigeria”, International Journal of Sustainable Built Environment, Vol 3, No. 1, June, pp 72-86,  ISSN: 2212-6090, DOI:  10.1016/j.ijsbe.2014.05.002, http://www.journals.elsevier.com/international-journal-of-sustainable-built-environment/

E S M Negim, R K Rakhmetullayeva, G Zh Yeligbayeva, P I Urkimbaeva, S T Primzharova, D B Kaldybekov, J M Khatib, G A Mun, C Williams (2014) “Improving biodegradability of polyvinyl alcohol/starch blend films for packaging applications”,  International Journal of Basic and Applied Sciences, Vol 3, No. 3, pp 263-273, Science Publishing Corporation, www.sciencepubco.com/index.php/IJBAS, doi: 10.14419/ijbas.v3i3.2842

 

K. Ontürka, S. Firat, I. Vural, J. M. Khatib (2014), “Improvement of Road Sub-base Fill by Using Waste Marble Dust and Fly Ash”, Journal of Polytechnic, Vol. 17, No. 1 (Special Issue), pp.35-42, (in Turkish), DOI : 10.2339/2014.17 Sayı 1, 35-42    ISSN: 2147-9429     http://www.politeknik.gazi.edu.tr/index.php/PLT/issue/view/71

 

El-Sayed Negim, Latipa Kozhamzharova, Yeligbaeva Gulzhakhan, Jamal Khatib, C. Williams, and Lyazzat Bekbayeva (2014), “Effect of copolymer latexes on physico-mechanical properties of mortar containing high volume fly ash as a replacement material of cement”, The Scientific World Journal, Vol 2014, Article ID 670710, 11 pages, 31August2014   http://www.hindawi.com/journals/tswj/aip/670710/

 

K Henni-Chebra, A Bougara, J M Khatib (2014), “Using Metal Plates for Measurement of Cement Dust Emission”, Proceedings of the ICE; Engineering Sustainability Journal. Vol 167, Issue 5, pp 208-215, October 2014,        ISSN: 1751-7680     DOI: 10.1680/ensu.14.00004

 

E.S.M  Negim, A.M.B  Aisha, U. Yessimkanova, A. Kurmanbekova, K. Tyazhina, P.I. Urkimbaeva, R.K. Rakhmetullayeva, E. Shatabayeva, G. Irmukhametova, G.A. Mun, G.Zh. Yeligbayeva, J.M. Khatib (2015), “The effect of terpolymer admixtures on physico-mechanical properties of cement pastes”, International Journal of Basic and Applied Sciences, Vol. 4, No 1, pp10-18,  Science Publishing Corporation;       doi: 10.14419/ijbas.v4i1.3807;     www.sciencepubco.com/index.php/IJBAS

 

G True, D Searle, J M Khatib (2015), “Digital imaging 2D and 3D particle assessment using a flat-bed scanner, Magazine of Concrete Research, Vol. 67, No. 19, pp 1033-1047. DOI: 10.1680/macr.14.00352 

 

M. Sonebi, E. Garcia-Taengua, K.M.A. Hossain, J. M. Khatib, M. Lachemi (2015), “Effect of nanosilica addition on the fresh properties and shrinkage of mortars with fly ash and superplasticizer”, Construction and Building Materials Journal, 1 June 2015, Vol 84, pp 269-276;   doi:10.1016/j.conbuildmat.2015.02.064

 

E. García-Taengua, M. Sonebi, K.M.A. Hossain, M. Lachemi, J. M. Khatib (2015), “Effects of the addition of nanosilica on the rheology, hydration and development of compressive strength of cement mortars”, Journal-Composites Part B: Engineering, Vol. 81, pp 120-129. doi:10.1016/j.compositesb.2015.07.009  

 

O Ahiakwo, D Oloke, S Suresh, J M Khatib (2015), “Implementing the last plannerTM system in a road construction project in Nigeria”,  Built Environment Journal, Vol 12, No. 2, July, pp 33-49, ISSN 1675-5022

 

C. Egenti, J. M. Khatib (2015). “Behaviour of Shelled Compressed Earth Masonry Unit under Load”. International Journal of Civil and Structural Engineering Research, Vol 3, No. 2, pp 70-73.   http://www.researchpublish.com/download.php?file=Behaviour%20of%20Shelled-2537.pdf&act=book.

C Egenti, J. M. Khatib, D. Oloke (2015). High Carbon Fly ash and Soil in Shelled Compressed Earth Masonry Units. International Journal of Interdisciplinary Research and Innovations, Vol. 3, No. 4, pp 61-65.

http://www.researchpublish.com/download.php?file=High%20Carbon%20Fly%20ash-2464.pdf&act=book.

 

C. Egenti, J. M. Khatib, D  Oloke, S Firat (2015). “Earth Wall Construction in the context of the Eurocode”. International Journal of Engineering Research and Reviews, Vol 3. No. 4, pp 27-30.

http://www.researchpublish.com/download.php?file=Earth%20Wall%20Construction-2458.pdf&act=book.

 

C. Egenti, J. M. Khatib  (2015). Strain in Compressed Earth Block with Increase in Stress. International Journal of Civil and Structural Engineering Research, Vol. 3, No. 2, pp 58-61.  

http://www.researchpublish.com/download.php?file=Strain%20in%20Compressed%20Earth%20Block-2475.pdf&act=book.

 

C. Egenti, J M Khatib, E. Negim (2015). “Performance of Compressed Earth Masonry Units in comparison with the prevailing Sand-Cement Wall Construction in Nigeria”. International Journal of Engineering Research and Reviews, Vol. 3, No. 4, pp 37-41.

 http://www.researchpublish.com/download.php?file=Performance%20of%20Compressed%20Earth%20Brick-2542.pdf&act=book.

 

Oriyomi M Okeyinka; David A Oloke; Jamal M Khatib (2015), “A Review on Recycled Use of Solid Wastes in Building Materials”, International Journal of Civil, Environmental, Construction and Architectural Engineering, Vol. 9, No. 12, pp1469-1478, World Academy of Science, Engineering and Technology (WASET),  scholar.waset.org/1999.3/10003128

 

J M Khatib, A Jefimiuk, S Khatib (2015), “Flexural behaviour of reinforced concrete beams containing expanded glass as lightweight aggregates”, Slovak Journal of Civil Engineering, Vol. 23, No. 4, pp 1-7, De Gruyter Publishing, DOI: 10.1515/sjce-2015-007,  http://www.svf.stuba.sk/generate_page.php?page_id=2075  ISSN: 1210-3896

 

Bengin Masih Awdel Herki, Jamal M Khatib (2016), “Structural behaviour of reinforced concrete beams containing a novel lightweight aggregate”, International Journal of Structural Engineering, Vol.  7, No. 1, pp 1-30, Inderscience publishers (IEL), DOI: 10.1504/IJSTRUCTE.2016.073676

 

Deinsam D Ogan, Issaka E Ndekugri, Chike F Oduoza, Jamal M Khatib (2016), Principles for developing an effective framework to control minerals and rocks extraction impacts, mitigate waste and optimise sustainable quarries management, Resources Policy Journal, Vol 47, pp 146-170, http://dx.doi.org/10.1016/j.resourpol.2016.01.004

 

H S Abdelgader, J Gorski, J M Khatib, A S El-Baden (2016), “Two-stage concrete: Effect of silica fume and superplasticizers on strength”, BFT International, Concrete Technology, Science and Research, March 2016, pp 38-47,   www.bft-international.com

 

J M Khatib, L Wright, P S Mangat (2016), “Mechanical and physical properties of concrete containing FGD waste”, Magazine of Concrete Research, Vol 68, Issue 11, 1June2016, pp 550-560, ICE Publishing, DOI: 10.1680/macr.15.00092  ISSN: 00249831

 

S Adu-Amankwah, J M Khatib, D E Searle, L Black (2016), “Effect of synthesis parameters on the performance of alkali-activated non-conformant EN 450 Pulverised Fuel Ash”, Construction and Building Materials Journal, 15 Sept 2016, Vol 121, pp. 453-459,  ISSN 0950-0618,    http://eprints.whiterose.ac.uk/id/eprint/100033

 

J M Khatib, L Wright, P S Mangat (2016), "Effect of desulphurised waste on long-term porosity and pore structure of blended cement pastes”, Sustainable Environment Research Journal, Vol. 26, Issue 5, September, pp 230-234, DOI: 10.1016/j.serj.2016.02.002, Ref. SERJ39, Manuscript ID SER2014-082; http://ser.cienve.org.tw, Accepted 5 Feb 2016. Received at Elsevier 10 June 2016.

 

B A Herki, J M Khatib (2016), “Valorisation of waste expanded polystyrene in concrete using a novel recycling technique”, European Journal of Environmental and Civil Engineering, Taylor & Francis pub, pp 1384-1402, Accepted 22 March 2016 http://dx.doi.org/10.1080/19648189.2016.1170729    ISSN: 19648189

 

Kangkang Tang, Jamal Khatib, Greg Beattie (2017), “Effect of partial replacement of cement with slag on the early-age strength of concrete”, Proceedings of the Institution of Civil Engineers - Structures and Buildings, Vol 170, Issue 6, June 2017, pp. 451-461,  ISSN 0965-0911, E-ISSN 1751-7702, DOI: 10.1680/jstbu.16.00038, Published Online: February 17, 2017

 

Alaa Hamood, Jamal M Khatib, Craig Williams (2017), “The effectiveness of using raw sewage sludge (RSS) as a water replacement in cement mortar mixes containing uprocessed fly ash (u-FA)”, Construction and Building Materials Journal, Vol 147, 30 Aug 2017, pp 27-34, http://dx.doi.org/10.1016/j.conbuildmat.2017.04.159

 

S Firat, J M Khatib, G Yilmaz, A T Comert (2017), “Effect of curing time on selected properties of soil stabilized with fly ash, marble dust and waste sand for road sub-base”, Waste Management & Research journal, WMR-17-0022.R1, Publication date: 12 June 2017, SAGE Publications, Pages 0734242X17705726, Vol 35, Issue 7, pp 747-756. DOI: https://doi.org/10.1177/0734242X17705726

 

O M Okeyinka, D A Oloke, J M Khatib, (2017), Optimisation of Mix Composition of Cement-less Wastepaper-based Lightweight Block (CWLB). International Journal of Theoretical and Applied Mechanics, 24 April 2017, Vol. 2, pp.25-34. International Association of Research and Science.  ISSN: 2367-8992; (www.iaras.org/iaras/journals/ijtam)

 

Oriyomi M Okeyinka, David A Oloke, Jamal M Khatib (2017), “Strength and stiffness properties of the optimum mix composition of cement-less wastepaper-based lightweight block (CWLB)”, WSEAS Transactions on Environment and Development, Volume 13, 2017, pp 335-345. E-ISSN: 2224-3496. http://www.wseas.org/multimedia/journals/environment/2017/a665915-022.pdf

 

M. Charbaji, O. Baalbaki, A. Elkordi and J. Khatib (2018), “Processing of incinerated municipal solid waste fly ash for use in concrete”, International Journal of Civil Engineering and Technology (IJCIET), Volume 09, Issue 13, December 2018, pp. 1853-1864, ISSN Print: 0976-6308 and ISSN Online: 0976-6316, Article ID: IJCIET_09_13_185, http://www.iaeme.com/ijciet/issues.asp?JType=IJCIET&VType=09&IType=13

 

H. Abdelgader; R.S. Fediuk; M. Kurpinska; J. Khatib; G. Murali; A. Baranov; R. A. Timokhin (2019), “Mechanical properties of two-stage concrete modified by silica fume”, Magazine of Civil Engineering (ISSN: 2071-0305), Vol. 89, Issue 5, pp 26-38. DOI: 10.18720/MCE.89.3      https://engstroy.spbstu.ru/en/article/2019.89.3/ https://engstroy.spbstu.ru/en/issue/89/

 

Khatib, A. Jahami, A. Elkordi, O. Baalbaki, O. (2019), “Structural performance of reinforced concrete beams containing plastic waste caps”, Magazine of Civil Engineering, Vol. 91, No. 7, pp. 73–79, ISSN 2071–0305, DOI: 10.18720/MCE.91.7 https://engstroy.spbstu.ru/en/article/2019.91.7/

Khatib, A. Jahami, O. Baalbaki, A. Elkordi, H. Abdelgader (2020) "Behavior of Reinforced Concrete Beams Containing Lightweight Aggregate in the Tensile Zone”, BAU Journal - Science and Technology (ISSN: 2706-784X), Vol. 1, Issue 2, Article 3. pp 1-7 https://digitalcommons.bau.edu.lb/stjournal/vol1/iss2/3

 

A. Chamaa, J. Khatib and A. Elkordi (2019), "A Review on the Use of Vegetable Oil and its Waste in Construction Applications”, BAU Journal - Science and Technology [ISSN: 2706-784X], Vol. 1, Issue 1, Article 4. Available at: https://digitalcommons.bau.edu.lb/stjournal/vol1/iss1/4

 

K. Abou Alfa, R. Harkouss, J. Khatib (2019), "Siderite as a Weighting Material in Drilling Mud", BAU Journal - Science and Technology [ISSN: 2706-784X], Vol. 1, Issue 1 , Article 1, Available at: https://digitalcommons.bau.edu.lb/stjournal/vol1/iss1/1

 

 Youcef Guettaf , Said Kenai, Jamal Khatib and Walid Yahiaoui (2020), “Effect of Wet Curing and Hot Climate on Strength and Durability of SCC with Natural Pozzolan”, Current materials science, Formerly: Recent Patents on Materials Science, [ISSN: 2666-1462 (Online) ISSN: 2666-1454 (Print)], Vol. 13, No. 1; pp 58-73, DOI: 10.2174/2666145413666200207123935.

 

H. Ghanem, J. Khatib, A. Elkordi (2020) "Effect of Partial Replacement of Sand by MSWI-BA on the Properties of  Mortar”, BAU Journal - Science and Technology (ISSN: 2706-784X), Volume 1, Issue 2, Article 4. pp 1-14.  

https://digitalcommons.bau.edu.lb/stjournal/vol1/iss2/4

 

Khatib, A. Jahami, O. Baalbaki, A. Elkordi, A. Bakri, R. Alaina (2020) "Performance of Concrete Containing Waste Plastic Straw Fibers”, BAU Journal-Science and Technology (ISSN: 2706-784X), Volume 1, Issue 2, Article 5. pp 1-10. https://digitalcommons.bau.edu.lb/stjournal/vol1/iss2/5

 

S. Fırat, S. Dikmen, G. Ylmaz, J. M. Khatib (2020), “Characteristics of Engineered Waste Materials Used for Road Subbase Layers”, KSCE Journal of Civil Engineering, [pISSN 1226-7988, eISSN 1976-3808], Vol. 24, No. 9,  pp 2643-2656. DOI: https://doi.org/10.1007/s12205-020-2242-0   (Published 29 July 2020)

 

A Jahami, Y Temsah, J Khatib, O Baalbaki, M Darwiche, S Chaaban (2020), “Impact behavior of rehabilitated post-tensioned slabs previously damaged by impact loading”, Magazine of Civil Engineering, Инженерно-строительный журнал, pp 134-146.

 

Y Ouldkhaoua, B Benabed, R Abousnina, EH Kadri, J Khatib (2020), “Effect of using metakaolin as supplementary cementitious material and recycled CRT funnel glass as fine aggregate on the durability of green self-compacting concrete”, Construction and Building Materials 235, 117802, (In Press)

 

H. Abdelgader, R. Suleiman, A. Adam, J. Khatib (2020) "Concrete Mix Design Using Simple Equations," BAU Journal - Science and Technology: Vol. 2 : Iss. 1, Article 2. ISSN: 2706-784X. Available at: https://digitalcommons.bau.edu.lb/stjournal/vol2/iss1/2

 

J. Bawab, J. Khatib, A. Jahami, S. Kenai, A. Elkordi (2020), "Effect of Using Cathode-Ray Tube (CRT) Waste Glass on Concrete Properties” BAU Journal - Science and Technology: Volume 2: Issue 1, Article 3.  ISSN: 2706-784X. Available at: https://digitalcommons.bau.edu.lb/stjournal/vol2/iss1/3

 

 J. Abou Shakra, R. Joumblat, J. Khatib, A. Elkordi (2020), "Corrosion of Coated and Uncoated Reinforcement in Concrete" BAU Journal - Science and Technology: Volume 2 : Issue 1 , Article 4. ISSN: 2706-784X. Available at: https://digitalcommons.bau.edu.lb/stjournal/vol2/iss1/4

 

Jad Bawab, Jamal Khatib, Ali Jahami, Adel Elkordi, Elhem Ghorbel (2021), “Structural Performance of Reinforced Concrete Beams Incorporating Cathode-Ray Tube (CRT) Glass Waste”, Buildings, MDPI, Vol. 11, No. 2, p67, https://doi.org/10.3390/buildings11020067

 

Salem Merabti, Said Kenai, Rafik Belarbi, Jamal Khatib (2021), “ Thermo-mechanical and physical properties of waste granular cork composite with slag cement”, Construction and Building Materials, Volume 272, 22 February 2021, p121923, https://doi.org/10.1016/j.conbuildmat.2020.121923

 

C. Egenti; J. Khatib (2021), “Affordable and Sustainable Housing in Rwanda”, Sustainability, MDPI, Vol. 13, No. 8, p4188. https://doi.org/10.3390/su13084188

 

Jad Bawab, Jamal Khatib, Said Kenai, Mohammed Sonebi (2021), “A Review on Cementitious Materials Including Municipal Solid Waste Incineration Bottom Ash (MSWI-BA) as Aggregates”, April, Buildings, Vol.11, No. 5, p179, DOI: 10.3390/buildings11050179

 

Lateef Assi, Ali Alsalman, David Bianco, Paul Ziehl, Jamal El-Khatib, Mahmoud Bayat, Falah H. Hussein (2021), “Multiwall carbon nanotubes (MWCNTs) dispersion & mechanical effects in OPC mortar & paste: A review”, Journal of Building Engineering, Vol. 43, November 2021, 102512; https://doi.org/10.1016/j.jobe.2021.102512

 

A. Jahami, Y. Temsah, J. Khatib, O. Baalbaki, S. Kenai (2021), “The behavior of CFRP strengthened RC beams subjected to blast loading”. Magazine of Civil Engineering. ISSN: 2712-8172, Vol. 103, No. 3. Article No. 10309. DOI: 10.34910/MCE.103.9

 

Siham Hammat, Belkacem Menadi, Said Kenai, Jamal Khatib, El-Hadj Kadri (2021), “Properties of Self-Compacting Mortar Containing Slag with Different Finenesses”, Civil Engineering Journal, (E-ISSN: 2476-3055; ISSN: 2676-6957), Vol. 7, No. 05, May, 2021, pp 840-856, http://dx.doi.org/10.28991/cej-2021-3091694

 

K Ramakrishnan, SR Depak, KR Hariharan, Sallal R Abid, G Murali, Daiane Cecchin, Roman Fediuk, YH Mugahed Amran, Hakim S Abdelgader, Jamal M Khatib (2021), “Standard and modified falling mass impact tests on preplaced aggregate fibrous concrete and slurry infiltrated fibrous concrete”, Construction and Building Materials, Volume 298, 6 September 2021, pp 123857,

https://doi.org/10.1016/j.conbuildmat.2021.123857

 

Syarif, M., Kırgız, M. S., de Sousa Galdino, A. G., El Naggar, M. H., Mirza, J., Khatib, J., & Tiwary, C. S. (2021). Development and assessment of cement and concrete made of the burning of quinary by-product. Journal of Materials Research and Technology. Elsevier, 6 October 2021, https://doi.org/10.1016/j.jmrt.2021.09.140

 

Khatib, J. (2021). Special Issue 2021–Use of Recycled and Waste Materials in Construction. Journal of King Saud University-Engineering Sciences (Elsevier), Vol. 33, Issue 5, P293.  https://doi.org/10.1016/j.jksues.2021.06.001

 

Khatib J (2021), Editorial, Proceedings of the Institution of Civil Engineers – Construction Materials, Vol. 174, No. 4, pp: 183–184, https://doi.org/10.1680/jcoma.2021.174.4.183

 

Ramakrishnan, K., Depak, S.R., Hariharan, K.R., Abid, S.R., Murali, G., Cecchin, D., Fediuk, R., Amran, Y.M., Abdelgader, H.S. and Khatib, J.M. (2021). Standard and modified falling mass impact tests on preplaced aggregate fibrous concrete and slurry infiltrated fibrous concrete. Construction and Building Materials, 298, p.123857. https://doi.org/10.1016/j.conbuildmat.2021.123857

 

Biricik, H., Kırgız, M.S., de Sousa Galdino, A.G., Kenai, S., Mirza, J., Kinuthia, J., Ashteyat, A., Khitab, A. and Khatib, J. (2021). Activation of slag through a combination of NaOH/NaS alkali for transforming it into geopolymer slag binder mortar–assessment the effects of two different Blaine fines and three different curing conditions. Journal of Materials Research and Technology, Vol. 14, pp.1569-1584. September–October 2021, https://doi.org/10.1016/j.jmrt.2021.07.014

 

Khatib, J., Jahami, A., El Kordi, A., Sonebi, M., Malek, Z., Elchamaa, R. and Dakkour, S. (2021), Effect of municipal solid waste incineration bottom ash (MSWI-BA) on the structural performance of reinforced concrete (RC) beams. Journal of Engineering, Design and Technology. http://dx.doi.org/10.1108/JEDT-01-2021-0068

 

Onturk, K., Firat, S., Yilmaz, G. and Khatib, J. (2021), Waste utilization to enhance performance of road subbase fill. Journal of Engineering, Design and Technology. https://doi.org/10.1108/JEDT-02-2021-0080

 

Khatib, J., Ramadan, R., Ghanem, H. and Elkordi, A. (2021). Volume Stability of Cement Paste Containing Limestone Fines. Buildings, Vol. 11, No. 8, p.366. Special Issue: Sustainable and Green Construction Materials: Opportunities for New and Existing Structures.  https://doi.org/10.3390/buildings11080366

 

Jad Bawab, Jamal Khatib, Hilal El-Hassan, Lateef Assi, Mehmet Serkan Kırgız (2021), “Properties of Cement-Based Materials Containing Cathode-Ray Tube (CRT) Glass Waste as Fine Aggregates-A Review”, Sustainability 2021, Vol. 13, Issue 20, 11529; https://doi.org/10.3390/su132011529

 

Mehmet Serkan Kırgız, André Gustavo de Sousa Galdino, John Kinuthia, Anwar Khitab, Muhammad Irfan Ul Hassan, Jamal Khatib, Hesham El Naggar, Carlos Thomas, Jahangir Mirza, Said Kenai, Tuan Anh Nguyen, Moncef Nehdi,  Muhammad Syarif, Ahmed Ashteyat, Ravindran Gobinath, Ahmed Soliman, Trinity A.Tagbor, Manoj  A. Kumbhalkar, , Naraindas Bheel, Chandra Sekhar Tiwaryu (2021), “Synthesis, physico-mechanical properties, material processing, and math models of novel superior materials doped flake of carbon and colloid flake of carbon”, Journal of Materials Research and Technology, Available online 30 October 2021, https://doi.org/10.1016/j.jmrt.2021.10.089

 

Jamal Khatib, Ali Jahami, Oussama Baalbaki, Adel Elkordi (2021), "New Type of Lightweight Aggregate for Use in Structural Concrete”, BAU Journal - Science and Technology, ISSN: 2706-784X, Vol. 3 : Iss. 1 , Article 1. https://digitalcommons.bau.edu.lb/stjournal/vol3/iss1/1

 

M. Sonebi, P. Thiele, A. Abdalqader, L. Dvorkin, N. Lushnikova, J. Khatib (2022), “Effect of Viscosity Modifying Agent on the Performance of Hybrid Bio-Based Concrete”, Construction Technologies and Architecture, Online: 5 January 2022, ISSN: 2674-1237, 2022 Trans Tech Publications Ltd, Switzerland, Vol. 1, pp 491-498.

 

Khatib, A. Jahami, M. Sonebi, A. Elkordi (2022), “Shear Behavior of Bamboo Reinforced Concrete Beams”, Construction Technologies and Architecture, Online: 5 January 2022, ISSN: 2674-123, 2022 Trans Tech Publications Ltd, Switzerland, Vol. 1, pp 730-734.

 

Jamal Khatib, Rawan Ramadan, Hassan Ghanem, Adel ElKordi (2022), “Effect of Using Limestone Fines on the Chemical Shrinkage of Pastes and Mortars”, Environmental Science and Pollution Research (ESPR), Online 6 January 2022, ISSN: 0944-1344, 1614-7499, Nature Springer, pp 1-12. https://doi.org/10.1007/s11356-022-18496-5

 

Joseph J Assaad, Jamal M Khatib, Rawan Ghanem (2022), “Bond to Bar Reinforcement of PET-Modified Concrete Containing Natural or Recycled Coarse Aggregates”, Environments, MDPI, Vol. 9, Issue 1, P 8,                    https://doi.org/10.3390/environments9010008

 

H. Kobrosli, O. Baalbaki, A. Jahami, Z. Abou Saleh, J. M. Khatib, Mehmet Serkan Kırgız, André Gustavo de Sousa Galdino (2022), “Influence of various design parameters of the grouted duct on mono-strand bond behavior in post tensioned members”, Journal of Materials Research and Technology, [ISSN 2238-7854], Accepted 6 January 2022, https://doi.org/10.1016/j.jmrt.2022.01.034, https://www.sciencedirect.com/science/article/pii/S2238785422000345

 

L. Bekbayeva, E. Negim, R. Niyazbekova, Z. Kaliyeva, G. Yeligbayeva, J. Khatib (2022). “The Effects of Modified Chitosan on the Physicomechanical Properties of Mortar”. International Journal of Technology. [ISSN 2086-9614], Volume 13(1), pp. 125-1354. DOI : https://doi.org/10.14716/ijtech.v13i1.4834

 

Jamal M Khatib, Rawan Ramadan, Hassan Ghanem, Adel Elkordi, Oussama Baalbaki, Mehmet Kırgız (2022), “Chemical shrinkage of paste and mortar containing limestone fines”, Materials Today: Proceedings, Elsevier, [ISSN: 2214-7853], 4 February 2022, https://doi.org/10.1016/j.matpr.2022.01.288

 

Jamal M Khatib, Rawan Ramadan, Hassan Ghanem, Adel Elkordi, Mohammed Sonebi (2022), “Effect of limestone fines as a partial replacement of cement on the chemical, autogenous, drying shrinkage and expansion of mortars”, Materials Today: Proceedings, Elsevier, [ISSN: 2214-7853], 3 February 2022, https://doi.org/10.1016/j.matpr.2022.01.336

 

Ali Jahami, Yehya Temsah, Jamal Khatib, Mohammed Sonebi (2022), “Rehabilitation of reinforced concrete slabs damaged by impact loading using swimmers as shear reinforcement”, Materials Today: Proceedings, Elsevier, [ISSN: 2214-7853], 11 February 2022, https://doi.org/10.1016/j.matpr.2022.02.010

 

Meheddene Machaka, Jamal Khatib, Safaa Baydoun, Adel Elkordi and Joseph J. Assaad (2022), “The Effect of Adding Phragmites australis Fibers on the Properties of Concrete”, Buildings, 12(3), 278; Published: 1 March 2022, https://doi.org/10.3390/buildings12030278

 

Joseph J. Assaad, Mario Khalil, Jamal Khatib (2022), “Alternatives to Enhance the Structural Performance of PET-Modified Reinforced Concrete Beams”, Environments, 9(3), 37, pp 1-16, https://doi.org/10.3390/environments9030037 , Published: 17 March 2022

 

Z.E.-A., Laidani, B. Benabed, R. Abousnina, M. K. Gueddouda, J. M. Khatib (2022), “Potential pozzolanicity of Algerian calcined bentonite used as cement replacement: optimisation of calcination temperature and effect on strength of self-compacting mortars”, European Journal of Environmental and Civil Engineering [ISSN: 1964-8189, 2116-7214] , Vol. 26, No. 4, pp. 1379–140. https://doi.org/10.1080/19648189.2020.1713898

 

Mohammed Sonebi, Ahmed Abdalqader, Tahreer Fayyad, Sofiane Amaziane, Jamal El-Khatib (2022), “Effect of fly ash and metakaolin on the properties of fiber-reinforced cementitious composites: A factorial design approach”, Computers and Concrete, [ISSN: 1598-8198 (Print), 1598-818X (Online)], Vol. 29, No. 5 (2022) 347-360, https://doi.org/10.12989/cac.2022.29.5.347

 

Firas Barraj, Jamal Khatib, Alberte Castro, Adel Elkordi (2022), “Effect of Chemical warm mix additive on the properties and mechanical performance of recycled asphalt mixtures”, Buildings, 1752531, Vol. 12, No. 7, p. 874. https://doi.org/10.3390/buildings12070874

 

Rabab Raydan; Farah Chamseddine; Ali Jahami, Oussama Baalbaki, Jamal Khatib, Adel Elkordi (2022) "Production of Low-cost Self-Compacting Concrete (SCC) Using Manufactured Aggregates", BAU Journal - Science and Technology: Volume 3: Issue 2, Article 3, June. DOI: https://www.doi.org/10.54729/HKRO9755   Available at: https://digitalcommons.bau.edu.lb/stjournal/vol3/iss2/3

Lelian ElKhatib, Fadi Al Aridi, Adel ElKordi, Jamal Khatib (2022) "Mechanical and Durability Properties of Geopolymer Concrete – A Review", BAU Journal - Science and Technology: Volume 3: Issue 2, Article 8. June 2022, DOI:https://www.doi.org/10.54729/SUIQ7034 Available at: https://digitalcommons.bau.edu.lb/stjournal/vol3/iss2/8

 

Suman Kumar Adhikary, Deepankar Kumar Ashish, Himanshu Sharma, Jitendra Patel, Žymantas Rudžionis, Mohammed Al-Ajamee, Blessen Skariah Thomas, Jamal M Khatib (2022), “Lightweight self-compacting concrete: A review”, Resources, Conservation & Recycling Advances, Elsevier, PII: S2667-3789(22)00044-X, DOI: https://doi.org/10.1016/j.rcradv.2022.200107, Reference: RCRADV 200107           

 

Rouba Joumblat, Adel Elkordi, Jamal Khatib, Zaher Al Basiouni Al Masri, Joseph Absi (2022), “Characterisation of asphalt concrete mixes with municipal solid waste incineration fly ash used as fine aggregates substitution”, International Journal of pavement Engineering, Taylor and Francis, https://doi.org/10.1080/10298436.2022.2099855

 

F. Barraj, A. Hatoum, J. Khatib, A. Elkordi (2022) “Framework to design successful pavement structure using default axle load spectra in areas suffering from scarcity of data: Lebanon case study”. Innovative Infrastructure Solutions, Springer, Vol. 7, No. 5, pp.1-20. [ISSN 2364-4184]. Published 6 August 2022, DOI: https://doi.org/10.1007/s41062-022-00897-7

 

B.M.A. Herki; J.M. Khatib; M.N. Hamadamin; F.A. Kareem (2022), “Sustainable Concrete in the Construction Industry of Kurdistan-Iraq through Self-Curing”, Buildings 2022, Vol. 12, 1318. https://doi.org/10.3390/buildings12091318

 

Rabab Raydan, Jamal Khatib, Ali Jahami, Abdul Kader El Hamoui, Farah Chamseddine (2022), “Prediction of the mechanical strength of concrete containing glass powder as partial cement replacement material”, Innovative Infrastructure Solutions, Springer Nature Switzerland AG 2022, 7:311, Received: 16 May 2022 / Accepted: 19 July 2022, https://doi.org/10.1007/s41062-022-00896-8

 

D. Nasr; R.E. Dahr; J. Assaad; J. Khatib (2022) “Comparative Analysis between Genetic Algorithm and Simulated Annealing-Based Frameworks for Optimal Sensor Placement and Structural Health Monitoring Purposes”. Buildings 2022, Vol. 12, 1383. https://doi.org/10.3390/buildings12091383

 

Herda Yati Binti Katman, Wong Jee Khai, Naraindas Bheel, Mehmet Serkan Kırgız, Aneel Kumar, Jamal Khatib, Omrane Benjeddou (2022), “Workability, Strength, Modulus of Elasticity, and Permeability Feature of Wheat Straw Ash-Incorporated Hydraulic Cement Concrete. Buildings 2022, Vol. 12, 1363. https://doi.org/10.3390/buildings12091363

 

A. A. Hatoum; J. M. Khatib; F. Barraj; A. Elkordi (2022) “Survival Analysis for Asphalt Pavement Performance and Assessment of Various Factors Affecting Fatigue Cracking Based on LTPP Data”. Sustainability 2022, 14, 12408. Published: 29 September 2022, https://doi.org/10.3390/su141912408

 

A. Saad; M. Bal; J. Khatib (2022); “The Need for a Proper Waste Management Plan for the Construction Industry: A Case Study in Lebanon”. Sustainability 2022, Published 7 October 2022, 14, 12783. https://doi.org/10.3390/su141912783

 

H. Ghanem; S. Chahal; J. Khatib; A. Elkordi (2022), “Flexural Behavior of Concrete Beams Reinforced with Recycled Plastic Mesh”. Buildings 2022, Published 28 November 2022, 12, 2085. https://doi.org/10.3390/ buildings12122085

 

R Ramadan, H Ghanem, J Khatib, A Elkordi (2022), “Correlations between different shrinkage parameters and expansion of paste and mortar containing limestone fines”, Türk Mühendislik Araştırma ve Eğitimi Dergisi, Turkish Journal of Engineering Research and Education, Türk Eğitim-Sen, ISSN: 2822-3454, Vol. 1, No. 2, pp 71-79

 

M Sonebi, A Abdalqader, S Amziane, L Dvorkin, E Ghorbel, S Kenai, J Khatib, N Lushnikova, A Perrot (2022), “Trends and opportunities of using local sustainable building materials in the Middle East and North Africa region”. RILEM Technical Letters, Vol. 7, pp 127-138. DOI: https://doi.org/10.21809/rilemtechlett.2022.169

 

A. Jahami; J. Khatib; R. Raydan (2022), “Production of Low-Cost, High-Strength Concrete with Waste Glass as Fine Aggregates Replacement”. Buildings 2022, 12, 2168. Published 8 December 2022. https://doi.org/10.3390/buildings12122168

 

A. Hatoum; J. Khatib; F. Barraj; A. Elkordi (2022) "Assessing the influence of overweight axles on rutting lives in flexible pavements using parametric survival analysis" BAU Journal - Science and Technology: Vol. 4: Iss. 1, Article 1. DOI: https://www.doi.org/10.54729/CUBR7851 Available at: https://digitalcommons.bau.edu.lb/stjournal/vol4/iss1/1

 

S. Abdelgader; M. Kurpinska; H. Abdelgader; J. Khatib (2022) "Concrete mix design using Abrams and Bolomey methods" BAU Journal - Science and Technology: Vol. 4: Iss. 1, Article 3. DOI: https://www.doi.org/10.54729/MJPS9917 Available at: https://digitalcommons.bau.edu.lb/stjournal/vol4/iss1/3

R. Ramadan; H. Ghanem; J. Khatib; A. Elkordi (2022) "Effect of hot weather concreting on the mechanical and durability properties of concrete – A Review" BAU Journal - Science and Technology: Vol. 4: Iss. 1, Article 4. DOI: https://www.doi.org/10.54729/AXEC5733 Available at: https://digitalcommons.bau.edu.lb/stjournal/vol4/iss1/4

 

Barraj; S. Mahfouz; H. Kassem; J. Khatib; D. Goulias; A. Elkordi (2023), “Investigation of Using Crushed Glass Waste as Filler Replacement in Hot Asphalt Mixtures”. Sustainability Published 25 January 2023, 15(3), 2241. https://doi.org/10.3390/su15032241

 

Jamal Khatib, Rawan Ramadan, Hassan Ghanem, Adel ElKordi (2023), “Effect of Using Limestone Fines on the Chemical Shrinkage of Pastes and Mortars”, Environmental Science and Pollution Research (ESPR), Online 6 January 2022, ISSN: 0944-1344, 1614-7499, Nature Springer, Vol 30, No. 10, pp 25287-25298, PMID: 34989996. https://doi.org/10.1007/s11356-022-18496-5

 

Y M Abbas; N Shafiq; G. Fares; M Osman; M I Khan; J M Khatib (2023) “Strength Iso-Responses of Shear-Deficient Ultra-High Performance Fiber Reinforced Concrete Beams”. Sustainability 2023, 15, 4265. Published: 27 February 2023, https://doi.org/ 10.3390/su15054265

 

Ghanem, H., Chahal, S., Khatib, J., Elkordi, A. (2023). “Experimental and Numerical Investigation of the Flexural Behavior of Mortar Beams Strengthened with Recycled Plastic Mesh”. Sustainability, 15(7), 5640. Sustainability 2023, Published: 23 March 2023, https://doi.org/10.3390/su15075640

 

Ramadan, R., Jahami, A., Khatib, J., El-Hassan, H., Elkordi, A. (2023). “Improving Structural Performance of Reinforced Concrete Beams with Phragmites Australis Fiber and Waste Glass Additives”. Applied Sciences, 13(7), 4206. Appl. Sci. 2023, Published: 26/05/2023. https://doi.org/10.3390/app13074206

 

Hachem, Y., Ezzedine El Dandachy, M., Khatib, J. M. (2023). “Physical, Mechanical and Transfer Properties at the Steel-Concrete Interface: A Review”. Buildings, 13(4), 886. Buildings 2023, Published: 28 March 2023, https://doi.org/10.3390/buildings13040886

 

Nasser Eddine, Z., Khatib, J., El Kordi, A., & Assi, L. (2023). “Performance of a Pervious Concrete Pavement Containing Municipal Solid Waste Incineration Bottom Ash: A Lebanese Case Study”. International Journal of Pavement Research and Technology, pp 1-14. https://doi.org/10.1007/s42947-023-00320-z

 

Hatoum A, Khatib J, Elkordi A. (2023), “Comparison of Flexible Pavement Designs: Mechanistic-Empirical (NCHRP1-37A) Versus Empirical (AASHTO 1993) Flexible Pavement Design Using Available Local Calibration Models”. Transportation Infrastructure Geotechnology. 3 May 2023, pp 1-23. https://doi.org/10.1007/s40515-023-00305-2

 

Khatib, J., Jahami, A., El Kordi, A., Sonebi, M., Malek, Z., Elchamaa, R. and Dakkour, S. (2023), Effect of municipal solid waste incineration bottom ash (MSWI-BA) on the structural performance of reinforced concrete (RC) beams. Journal of Engineering, Design and Technology. Vol. 21, No. 3, pp 862-882, 2 May 2023, ISSN: 1726-0531 http://dx.doi.org/10.1108/JEDT-01-2021-0068

 

Elkhatib, L. , Khatib, J. , Elkordi, A. & Fırat, S. (2023). An Experimental Study on the Total and Capillary Water Absorption of Mortar Containing Phragmites Australis Ash . Turkish Journal of Engineering Research and Education, Türk Eğitim-Sen, ISSN: 2822-3454, Türk Mühendislik Araştırma ve Eğitimi Dergisi , Vol. 2 (No. 1) , pp 67-72 . https://dergipark.org.tr/tr/pub/tmaed/issue/77332/1275707

Ali Jahami, Jamal Khatib, Jad Bawab (2023), “An Experimental and Numerical Evaluation of the Structural Performance of Concrete Beams Containing Bamboo Shear Reinforcement”, Steps For Civil, Construction and Environmental Engineering (SCCEE), ISSN: 3005-8198 (online) / 3005-818X (print), Volume 1, Issue 1, pp: 1-9. https://doi.org/10.61706/120111

 

Shebli, Ali; Khatib, Jamal; Elkordi, Adel (2023) "Mechanical and Durability Properties of Fly Ash Geopolymer Concrete – A Review," BAU Journal-Science & Technology, Vol. 4, Issue 2, Article 5. June, https://doi.org/10.54729/2706-784X.1097

 

ElKhatib, Lelian; Elkordi, Adel; & Khatib, Jamal (2023) "Methods and Surface Materials Repair for Concrete Structures – A Review" BAU Journal – Science & Technology, Vol. 4 (Iss. 2), Article 7. June, https://doi.org/10.54729/2706-784X.1099

 

Khatib, Jamal Amer, Israa; Ghanem, Hassan; Elkordi, Adel (2023) "The Influence of Bio-Inhibitor on the Corrosion Resistance of Reinforced Concrete Beams Containing MSWI-BA as a Partial Sand Replacement", BAU Journal Science & Technology, Vol. 4 (Iss. 2), Article 10. June, https://doi.org/10.54729/2959-331X.1102

 

J.M. Khatib; L.W. ElKhatib; A. Elkordi, M. Sonebi (2023) “Length change of mortar containing Phragmites Australis Ash (PAA)”. Materials Today: Proceedings. Available online 18 July 2023. https://doi.org/10.1016/j.matpr.2023.07.105

 

Khatib, J., ElKhatib, L., Assaad, J., & El Kordi, A. (2023). Properties of mortar containing Phragmites Australis Ash. Journal of Engineering, Design and Technology.  https://doi.org/10.1108/JEDT-12-2022-0610

 

Khatib J (2023), Editorial, Proceedings of the Institution of Civil Engineers – Construction Materials, Vol. 176, No. 5, pp: 185, Emerald Pub,

https://doi.org/10.1680/jcoma.2023.176.5.1835

 

Abderrazak Barkat, Said Kenai, Belkasem Menadi, El-Hadj Kadri and Jamal Khatib (2023), “Relationships between Mortar Spread and the Fresh Properties of SCC Containing Local Metakaolin”. Infrastructures, Vol. 8, issue 10, 137. Published: 23 September 2023, https://doi.org/10.3390/ infrastructures8100137

 

MB Khan, MI Khan, N Shafiq, YM Abbas, M Imran, G Fares, JM Khatib (2023), “Enhancing the mechanical and environmental performance of engineered cementitious composite with metakaolin, silica fume, and graphene nanoplatelets”, Construction and Building Materials 404, 133187, https://doi.org/10.1016/j.conbuildmat.2023.133187

 

Jad Bawab, Amr El-Dieb, Hilal El-Hassan, Jamal Khatib (2023), Effect of different activation techniques on the engineering properties of cement-free binder containing volcanic ash and calcium carbide residue,  Construction and Building Materials, Volume 408, Pub. 11 Oct December 2023, 133734,  https://doi.org/10.1016/j.conbuildmat.2023.133734

Zeinab Nasser Eddine, Firas Barraj, Jamal Khatib, Adel Elkordi (2023), Volume Stability of Pervious Concrete Pavement Containing Municipal, Solid Waste Incineration Bottom Ash, International Journal of Pavement Research and Technology, https://doi.org/10.1007/s42947-023-00379-8

 

Ali Jahami, Hussein Mouzanar, Sarah Mahfouz, Jamal Khatib and Mohammed Sonebi (2023), “Effect of Graphene as Additive on the Mechanical Properties of Concrete”, Nano World Journal, 9(S2): S87-S92, Pub. 25 Sept 2023, https://doi.org/10.17756/nwj.2023-s2-015

 

Kumar, A.; Meena, R.K.; Raj, R.; Khan, M.I.; Khatib, J.M. (2023), CFD Study of Pressure Distribution on Recessed Faces of a Diamond C-Shaped Building. Buildings, 13, 2800. https://doi.org/10.3390/buildings13112800, Pub. 8 November 2023, https://doi.org/10.3390/buildings13112800

 

Jad Bawab, Hilal El-Hassan, Amr El-Dieb, Jamal Khatib (2023), Effect of Mix design parameters on the properties of cementitious composites incorporating volcanic ash and dune sand, Developments in the Built Environment, Volume 16, Published December 2023, 100258. Online 5 Nov 2023, https://doi.org/10.1016/j.dibe.2023.100258

 

Jahami, A.; Younes, H.; Khatib, J. (2023), Enhancing Reinforced Concrete Beams: Investigating Steel Dust as a Cement Substitute. Infrastructures 2023, 8, 157. Published: 31 October 2023, https://doi.org/10.3390/infrastructures8110157

 

Zeinab Nasser Eddine, Firas Barraj, Jamal Khatib, Adel Elkordi (2023), “From waste to resource: utilizing municipal solid waste incineration bottom ash and recycled rubber in pervious concrete pavement”,  Innovative Infrastructure Solutions, volume 8, Issue 12, Article number: 319, 9 November 2023, https://doi.org/10.1007/s41062-023-01289-1

 

Mokhtaria Benkaddour, Said Kenai, Walid Yahiaoui, Hamza Bensaci, Jamal Khatib (2023), “Rheological, mechanical and durability performance of some North African commercial binary and ternary cements”, Case Studies in Construction Materials, Volume 19, December 2023, e02689, https://doi.org/10.1016/j.cscm.2023.e02689

 

Kumar, A.; Meena, R.K.; Raj, R.; Khan, M.I.; Khatib, J.M. (2023), “Wind Effects on Re-Entrant Wing Faces of Plus Plan-Shaped Building. Buildings, 2023, 13, 3108. https://doi.org/10.3390/buildings13123108, Published: 14 December 2023

 

Makhmetova A.R., Negim El-Sayed, Ainakulova D.T., Yeligbayeva G., Khatib J.M. (2024), “An Overview of Epoxy Resins as coating to protect metals from corrosion”, Complex Use of Mineral Resources- Engineering and Technology, Creative Commons,  ISSN-L 2616-6445, ISSN 2224-5243, 328(1):20-32, Accepted: April 4, 2023, DOI: 10.31643/2024/6445.03

 

Jamal Khatib (2023), EDITORIAL (December 2023) | BAU Journal Science and Technology, Vol. 5: Iss. 1, https://digitalcommons.bau.edu.lb/stjournal/vol5/iss1/

 

Chour, Abbas and Khatib, Jamal (2023) "The effect of fine recycled concrete aggregates on the mechanical and durability properties of concrete,  BAU Journal - Science and Technology: Vol. 5: Iss. 1, December, Article 6. DOI: https://doi.org/10.54729/2959-331X.1113

 

Shebli, Ali; Khatib, Jamal; and Elkordi, Adel (2023) "The effect of walnut shel ash on the properties of cement paste and mortar: A study on partial replacement of cement", BAU Journal - Science and Technology: Vol. 5: Iss. 1, December, Article 10. DOI: https://doi.org/10.54729/2706-784X.1121

 

Ghanem, H.; Ramadan, R.; Khatib, J.; Elkordi, A. (2024),  “A Review on Chemical and Autogenous Shrinkage of Cementitious Systems”. Materials, Vol. 17, 283. Published: 5 January 2024, https://doi.org/10.3390/ma17020283

Innovative construction materials

RESEARCH GRANTS AND CONSULTANCIES

 

  1. 2016: British Council Award, (TR/012012/KP04) (£5,000): UK-Turkey HE Partnership Programme. “Reducing Energy Requirements in Construction by Using Industrial By-Products”. Universities of Wolverhampton and Sakarya

 

 

  1. 2015: Awarded an MSc Research Grant by the Institution of Structural Engineers on “Enhancing the flexural capacity of reinforced concrete beams made with recycled lightweight aggregates using carbon fibre”, ” (one of four awarded nationally). £500.

 

        http://www.istructe.org/education/scholarships-grants-and-bursaries/msc-research-grants

 

2.            2014-2015: (Lead Coordinator) British Council Award (Project No: 150778454) (£44,200): Newton-Al-Farabi Partnership Programme- British Council Researcher Links Programme. “Utilisation and Treatment of wastes arising from mining activities, oils and other Industries: a) Mining solid wastes; b) Mining waste water; c) Oil and Gas industry waste; d) Coal power station wastes; e) Cement manufacture waste and e) Food waste”, held between 27-31Jan15, University of Wolverhampton, Satpayev KazNTU & Al-Farabi Universities. http://www.britishcouncil.org/education/science/current-opportunities/kazakhstan-workshop-waste

 

3.             2013-2014: (Lead Investigator) British Council Award (TR/012012/KP04) (£5,000): UK-Turkey HE Partnership Programme. “Reducing Energy Requirements in Construction by Using Industrial By-Products”. Universities of Wolverhampton and Sakarya.

 

  1. 2012-2013: Awarded a Research Grant by the Institution of Structural Engineers on “Influence of shredded waste plastic on flexural performance of reinforced concrete beams” (one of ten awarded nationally). £800.
  2. 2011-2012: Awarded a Research Grant by the Institution of Structural Engineers on “Flexural behavior of reinforced concrete beams containing sustainable novel lightweight aggregate”. (one of seven awarded nationally). £800.

http://www.istructe.org/knowledge/topic_areas/research/pages/undergraduateresearchgrants.aspx

 

5.             2012-2013: (Lead Investigator) British Council Award (TR/012012/KP04) (£15,900): UK-Turkey HE Partnership Programme. “Reducing Energy Requirements in Construction by Using Industrial By-Products”. Universities of Wolverhampton and Sakarya.

 

6.            2013-2015: (Lead Investigator) European Research proposal  - FW/JR rea.p.2(2011) – Marie Curie Action-International Incoming Fellow (IIF)- IIF – Proposal Number 300427 – Project Acronym: ProSec. Call identifier: FP7-PEOPLE-2011-Value €279,000. Contract has been signed (Score 90.5/100)

 

http://www.istructe.org/knowledge/topic_areas/research/pages/undergraduateresearchgrants.aspx

 

  1. 2010: Royal Society Travel Grant to attend an International Conference in Ancona-Italy, (£1300).
  2. 2012-2014: Nigerian Government Scholarship for PhD Researcher on the Innovative Production of Rammed Earth Block. (£15,000)

 

 

  1. 2011–2014: Northern Iraqi Government Scholarship for PhD Researcher ‘Producing sustainable light-weight construction materials’. The research will focus on the use of local and less energy intensive materials. (~ £30,000).
  2. 2010: Studentship awarded by the University to conduct research on alkali activated fly ash (waste material). The research would allow the use of fly ash to fully replace cement (energy intensive material). ~ (£42,000)

 

 

  1. 2010: Studentship awarded by the University to conduct research on the use of sewage sludge in construction applications which would lead to a less energy intensive wastewater treatment and thereby positive impact on the environment. circa (£42,000)
  2. 2010: Studentship awarded by the University to conduct research on thermal induced cracking in reinforced concrete structures. The research aims to predict the likelihood of cracks and take appropriate actions, circa (£9000)

 

 

  1. 2008: Studentship awarded by the University to conduct research on the use/environmental impact of municipal solid waste incineration bottom ash (MSW-IBA) associated with its uses in construction applications, circa (£9000)
  2. 2001: Deterioration of reinforced concrete pipe-on behalf of a materials and testing company in South Yorkshire. This was part of a large investigation to assess the reason for this deterioration. (circa £1000)

 

 

  1. 1997-2000: EPSRC Research Reference A338 1201, ‘Use fly ash and metakaolin in concrete applications, 1996, £101,769 (£123,269 in total including industrial contribution), co-investigator
  2. 2000: Structural assessment of Sheffield Supertram - Bond between the track and adjacent concrete. Consultancy work. ( circa £8000).

 

 

  1. 1989: Structural and durability performance of new roofing materials for domestic dwelling, (circa £700).
  2. 1989: Structural assessment of damaged building due to fire in North East Scotland, circa (£500).

 

_________________________________________________________________________________________________________________________________________________

Professor Jamal Khatib,

BEng, MEng(Sc), PhD, HonProf(IMUST), CEng, EUR ING, FICE, MIEI (till 2015), M-EPSRC-APRC, MEPC, MOIA,  FHEA, MIRED, SMUACSE, PGCert-Ed, PGCert-PjtMgt, Cert-EnvMgt.

Professor of Civil Engineering (Construction Materials),

University of Wolverhampton

Faculty of Science and Engineering

Wulfruna Street

Wolverhampton

WV1 1LY

UK

Email:  j.m.khatib@wlv.ac.uk

 

Honorary Professor: Inner Mongolia University of Science and Technology, China

Visiting Professor: University of La Rochelle, France

Visiting Professor: Shanghai Jin tao University, China

Member of the EPSRC Peer Review College

 

Top 2% researcher globally in Building and Construction (Stanford University Classification-October 2020, October 2021 and October 2022)

 

https://scholar.google.com/citations?user=58md5JgAAAAJ&hl=en

https://www.researchgate.net/profile/Jamal_Khatib2

https://www.linkedin.com/in/jamal-khatib-8a069213

http://www.wlv.ac.uk/about-us/our-schools-and-institutes/faculty-of-science-and-engineering/all-faculty-staff/school-of-architecture-and-the-built-environment-staff/jamal-khatib/

publons.com/a/460541/

https://independent.academia.edu/JamalKhatib

https://orcid.org/0000-0002-4393-6728

_____________________________________________________________________________________________________________________________________________________________________