Name Professor Jamal Khatib
Job Title Chair in Civil Engineering
Faculty Faculty of Science and Engineering
School School of Architecture and Built Environment
Subject(s) Civil Engineering
Tel 01902 518588/8543
Email j.m.khatib@wlv.ac.uk

image

Jamal Khatib, BEng, MEng(Sc), PhD, CEng, FICE, FHEA, EUR ING, PG.Cert. Ed, PG.Cert. PjtMgt, Cert. EnvMgt, MEPC, MOIA, is presently Professor of Civil Engineering (Sustainable Construction Materials), Faculty of Science and Engineering at the University of Wolverhampton (UoW) - UK. His academic career began in 1987 as a Research Student/Assistant/Fellow, at the  University of Aberdeen. In 1994 he moved to take another Research Fellow post at the University of Glamorgan (now University of South Wales) until 1997. He then took a permanent position as a Lecturer/Senior Lecturer in Civil Engineering at Sheffield Hallam University (SHU). During that time and due to research collaboration with IMUST-China, he was awarded the title of Honorary Professor in 2001. After 9 years at SHU, he moved to the University of Wolverhampton (UoW) as a Reader in Civil Engineering and became a Professor in July12. In 2010, he achieved the Chartered Engineer status of the Institution of Civil Engineer (ICE). Areas of research specialism include a number of sustainable construction materials themes: a) use variety of waste materials in the production of construction/structural materials, b) novel construction materials (e.g. metakaolin), c) concrete subjected to harsh environments, d) lightweight and self-compacting concrete and e) behaviour of structural materials. Prof Khatib was one of the early UK researchers who conducted research on metakaolin as partial substitution of cement and his publications in this areahave been extensively cited.According to the ISI Web of Science and Scopus Prof Khatib has an H-index of 16 and 19 respectively.  Microsoft Academic classified Prof Khatib as one of the top authors in cement with a G-Index of 18 http://academic.research.microsoft.com/RankList?entitytype=2&topDomainID=12&subDomainID=1&last=0&start=1&end=100 Also and according to Google scholar there is more than 3000 citations, an H-index of 23 and i10-index of 33 http://scholar.google.com/citations?hl=en&user=eRDOWn8AAAAJ Many papers were rankedas the top 25 articles. The products of his extensive research activities have been comprehensively disseminated through: ~ 400 refereed academic journal & conference papers; text books, research seminars and workshops; articles,  features in the construction press and others. He acts as a reviewer to over 70 international refereed journals, book publishers and others. He sits on the technical committees of many international research conferences. He is an Editorial Board member of four academic Journals and an Associate Editor for the Journal of Emerging Trend in Engineering & Applied Sciences. Prof Khatib was a submitting staff member for the RAE/REF 1996 (Glam), 2001 (SHU) and 2008 & 2014 (UoW).

 

Prof Khatib is a recipient of research funding from the European Union (EU), the British Council, The Institution of Structural Engineers and the Royal Society. He established strong research links with Universities across the world; China, Algeria, India, Turkey; Nigeria, Kazakhstan, Iraq, Ukraine, US, Canada, France, Finland, Portugal, Slovenia, South Africa, Austria & Australia.

  • Sustainable construction materials in:
    • Concrete
    • Pavement
    • Masonry
    • Rammed Earth (Adobe)
    • Soil stabilisation)

                                                                   

  • Structural materials

 

  • Using waste in construction (Coal fly ash; Flue Gas Desulphurisation (FGD); Silica fume; Slag; Municipal solid waste incineration bottom ash (MSWI-BA); Sludge (e.g. sewage); recycled concrete; recycled glass; recycled brick, ground brick, foam glass, foundry sand; waste rubber (e.g. rubber tyre); waste plastic; Waste polystyrene)

 

  • Lightweight aggregate (e.g. expanded clay, expanded polystyrene)

 

  • Novel materials in construction (metakaolin-calcined clay,hybrid/composite materials, novel light-weight aggregates, alkali activation of pozzolans (non-cement based);

 

  • Novel admixtures-(EU supported project) for self-compacting concrete

Research and Consultancy are in the broad field of Sustainable Construction/Structural Materials. Expertise includes the utilisation of waste/recycled and novel materials in cement based systems to produce construction materials (e.g. concrete, pavement). Waste comprises industrial by-products (e.g. fly ash, silica fume, slag, desulphurised waste-FGD), demolition waste (e.g. recycled brick, recycled concrete, ground brick, foamed glass), municipal solid waste incineration bottom ash (MSWI-BA), sludges (e.g. sewage). Novel materials include metakaolin (calcined clay), hybrid/composite materials, novel light-weight aggregates, alkali activation of pozzolans and geopolymers. Prof Khatib was one of the early UK researchers to study the effect of metakaolin on the performance of cement based materials. Published work on metakaolin has been widely cited.

Other consultancy/research expertise includes Lime Stabilisation of Soils, utilisation of industrial by-products to stabilise contaminated soils, Environmental Assessment of Soil & Construction Materials containing waste (e.g. MSWI-BA) and Rammed Earth. Structural Assessment and Performance of Building Materials form integral parts of this work. Prediction and modeling of thermal induced cracking in reinforced concrete structures is another area of research. Research interests are also in the use of waste/recycled materials in Pavement Engineering. Other research activities include Construction Project Management.

Research involves the study of mechanical and durability properties. These include, strength (e.g. compressive, flexural), non-destructive testing, chemical attack, prediction of chloride penetration into concrete and its effect on reinforcement corrosion, carbonation, porosity and pore size distribution, capillary water absorption, shrinkage (e.g.  chemical, plastic, autogenous) using novel techniques, product of hydration using TG analysis, leaching characteristics of heavy elements and others (i.e. environmental impact).

The above research focuses on the utilisation of waste/recycled materials in producing high grade construction materials and this is in line with the government (and global) agenda to reduce CO2 emission, which rises the potential for research funding.

 

Prof Khatib has more than 300 publications and 3000 citations, google h-index of 25 and an i-10 index of 39.  http://scholar.google.com/citations?hl=en&user=eRDOWn8AAAAJ&view_op=list_works&pagesize=100    . He has 16 PhD completions, currently supervising 12 PhDs and has examined 33 PhD students.

 

Research Projects

 1.         The durability of mortar with ground clay brick as partial cement replacement

 2.         Properties of concrete containing desulphurised waste

 3.         Leaching behaviour, mechanical and durability properties of mortar containing municipal incineration bottom ash

 4.         Bond strength performance characteristics of brick-mortar interfaces

 5.         Developments in aggregate recycling with bitumen emulsion and hydraulic binders for roads

 6.         Stabilisation of metal contaminated solutions and soils using blended binders derived from waste materials

 7.         Image scanning technique for the determination of concrete pores

 8.         Production of light-weight concrete materials made of treated sustainable light-weight aggregates

 9.         Raw sewage sludge utilisation in construction applications: Engineering and environmental performance

 10.      Novel manufacturing and properties of composite rammed earth blocks

 11.      Characterisation of shape of fine recycled crushed coloured glass and the effect on the properties of structural concrete when used as a fine aggregate replacement

 12.      Environmental impact of using municipal solid waste incineration ash in construction

 13.      Prediction of early thermal cracking of reinforced concrete structures

 14.      Modelling and properties of rammed earth as construction  materials

 15.      Purification of contaminated soil from crude oil spill in Iraq and the use of zeolites as a remediation tool

 16.      The applicability of recycled waste paper as lightweight building materials

 17.      Waste plastic/rubber in construction

 18.      Metakaolin utilisation in cementitious materials

 19.      Novel chemical admixtures from waste products for concrete applications

 20.      Recycled aggregate usage

University of Wolverhampton

 

BEng, MEng(Sc), PhD, HonProf(IMUST),CEng, EUR ING, FICE, FHEA, MIEI (till 2015), MOIA, MEPC, MIRED, SMUACSE, PGCert-Ed, PGCert-PjtMgt, Cert-EnvMgt.

 

ACADEMIC QUALIFICATIONS

 

1987-1991

 

PhD, Construction/Structural Materials, University of Aberdeen - UK.

 

1985-1986

 

MSc (taught course), Structural Engineering, University of Liverpool – UK

 

1978-1983

 

BEng, Civil/Structural Engineering, BAU – Lebanon

 

1997-1999

 

Postgraduate Certificate in Teaching and Learning in Further and Higher Education - Sheffield Hallam University - UK

 

2005-2007      

 

Postgraduate Certificate in Project Management with Distinction, Sheffield Hallam University – UK

1996-1997      

 

 

Certificate in Environment Management System-Institute of Quality Assurance - UK

 
 
PROFESSIONAL/OTHER QUALIFICATIONS

 

2001

 

Honorary Professor - Awarded by the Inner Mongolia University of Science and Technology, China

 

2015

 

Visiting Professor – University of La Rochelle, France, June/July 2015

 

2010

 

Chartered Engineer (CEng), Member of the Institution of Civil Engineers (MICE) - UK.  

 

2016

 

Fellow of the Institution of Civil Engineer (FICE) - UK

 

2007

 

Fellow of theHigher Education Academy (FHEA) - UK.

 

2002-2015

 

Chartered Engineer (CEng), Member of the Institution of Engineers of Ireland (MIEI)

 

1984

 

Member of the “ Ordre des Ingenieurs et Architects”- Liban.

 

2013

 

Member of the Engineering Professors’ Council – UK

 

2015

 

European Engineer (EUR ING), European Federation of National Engineering Associations (FEANI)

 

2015

 

Member of the Institute of Research Engineers and Doctors (IRED), www.theired.org

 

Senior Member of the Universal Association of Civil, Structural &  Environmental Engineers     

Publications (selected)

 

P S Mangat and J M el-Khatib (1992) “Influence of Initial Curing on Sulphate Resistance of blended Cement Concrete”, Cement and Concrete Research Journal, Vol. 22, No. 6, November 1992, pp1089-1100. ISSN: 0008-8846 

 

P S Mangat, J M el-Khatib and B T Molloy (1994) “Microstructure, Chloride Diffusion and Reinforcement Corrosion in Blended Paste and Concrete”, Journal of Cement and Concrete Composites, Vol.16, 1994, pp 73-81. ISSN:  0958-9456    

  

S Wild, M Hadi and J M Khatib (1995) “The Influence of Gypsum Content on the Porosity and Pore Size Distribution of Cured PFA-Lime Mixes”, Advances in Cement Research Journal, Vol.7, No.26, Apr 1995, pp 47-55. ISSN:  0951-7197       

 

P S Mangat and J M Khatib (1995) “Influence of Fly Ash, Silica Fume and Slag on Sulphate Resistance of Concrete”, American Concrete Institute-Materials Journal, Vol.92, No.5, 1995, pp 542-552.

 

J M Khatib and P S Mangat (1995) “Absorption Characteristics of Concrete as a Function of Location Relative to the Casting Position”,  Cement and Concrete Research Journal, Vol.25, No.5,  July 1995, pp 999-1010. ISSN: 0008-8846

 

S Wild, B B Sabir and J M Khatib (1995) “Factors Influencing Strength Development of Concrete Containing Silica Fume”, Cement and Concrete Research Journal, Vol.25, No.7, September 1995, pp 1567-1580. ISSN: 0008-8846

 

S Wild, J M Khatib and A Jones (1996) “Relative Strength, Pozzolanic Activity and Cement Hydration in Superplasticised Metakaolin Concrete”, Cement and Concrete Research Journal, Vol.16, No.10, 1996, pp 1537-1544. ISSN: 0008-8846  

 

J M Khatib and S Wild (1996) “Pore Size Distribution of Metakaolin Paste”, Cement and Concrete Research Journal. Vol.26, No.10, 1996, pp 1545-1553. ISSN: 0008-8846       

 

S Wild and J M Khatib (1997) “Portlandite Consumption in Metakaolin Cement Pastes and Mortars”,  Cement and Concrete Research Journal. Vol.27, No.1, 1997, pp 137-146. ISSN: 0008-8846       

 

S Wild , J M Khatib and M O’Farrell (1997) “Sulphate Resistance of Mortar Containing Ground Brick Clay Calcined at Different Temperatures”, Cement and Concrete Research Journal, Vol.27, No.5, 1997, pp 697-709. ISSN: 0008-8846      

 

J M Khatib and S Wild (1998) “Sulphate Resistance of Metakaolin Mortar”, Cement and Concrete Research Journal, 1998, Vol. 28, No. 1, pp 83-92. ISSN: 0008-8846       

 

S Wild, J M Khatib and L Roose (1998) “Chemical and Autogenous Shrinkage of Metakaolin Paste”, Advances in Cement Research Journal, 1998, Vol 10, No 3, 1998, pp 1-11. ISSN:  0951-7197            

 

J M Khatib and P S Mangat (1999) “Influence of Superplasticiser and Curing on Porosity and Pore Structure of Cement Paste”, Journal of Cement and Concrete Composites, December 1999, Vol. 21, pp 431-437.   ISSN:  0958-9456    

 

J M Khatib and P S Mangat (2000) “Porosity and Pore Size Distribution of Cement Paste Exposed to Different Curing Regimes – Influence of Superplasticizer”, L’industria Italiana del Cemento Journal, No. 750 – iiC,   January 2000, pp 76 – 83.

 

J M Khatib and P S Mangat (2002) “Influence of High Temperature and Low Humidity Curing on Chloride Penetration in Blended Cement Concrete”, Cement and Concrete Research Journal, Vol 32, No. 11, 2002, pp 1743-1753. ISSN: 0008-8846

 

J M Khatib and P S Mangat (2003) “Porosity of Cement Paste Cured at 45°C as a Function of Location Relative to Casting Position”, Journal of Cement and Concrete Composites, Vol 25, No 1,  2003, pp 97-108.

 

J M Khatib and P S Mangat (2003), A reply to the discussion by M. Collepardi of the paper, “Influence of High Temperature and Low Humidity Curing on Chloride Penetration in Blended Cement Concrete”, Cement and Concrete Research Journal , Vol. 33, 2003, pp 1705-1706. ISSN: 0008-8846         doi: 10.1016/S0008-8846(03)00134-0

 

J M Khatib and R Clay (2004) “Absorption Characteristics of Metakaolin Concrete”, Cement and Concrete Research Journal, Vol. 34, No. 1, 2004, pp 19-29. ISSN: 0008-8846         doi: 10.1016/S0008-8846(03)00188-1    

 

J M Khatib (2005) “Properties of Concrete Containing Fine Recycled Aggregates”, Cement and Concrete Research Journal, Vol. 35, No. 4, April 2005, pp 763-769. ISSN: 0008-8846        doi: 10.1016/j.cemconres.2004.06.017         

 

J M Khatib and J J Hibbert  (2005) “Selected Engineering Properties of Concrete Incorporating Slag and Metakaolin”, Construction and Building Materials Journal, Vol. 19, No. 6, July 2005,     pp 460-472. ISSN 0950-0618  doi: 10.1016/j.conbuildmat.2004.07.017   

 

 

J Zhang, J M Khatib, C Yan (2006) “The Study of Mechanical and Durability Properties of Bricks Made with Different Fly Ashes”, New Building Materials Journal, In Chinese, June 2006, pp 17-21.

 

P S Mangat, J M Khatib and L Wright (2006) "Optimum Utilisation of Flue Gas Desulphurisation (FGD) Waste in Blended Binder for Concrete", Construction Materials Journal - Proceedings of the Institution of Civil Engineers. Vol 1, No. 2, August 2006, pp 60-68. ISNN 1747-650X     

 

J M Khatib and A Blagden (2006) "Has Adjudication been Accepted as an Effective Form of Dispute Resolution within the UK Construction Industry", Construction Information Quarterly Journal , CIOB, December 2006, Issue 4, pp 181-184.

 

J M Khatib, N. Chileshe, S. Sloan (2007)“Antecedents and Benefits of 3D and 4D Modelling for Construction Planners”, Journal of Engineering, Design and Technology, 2007, Vol 5, Issue 2, pp 159-172. ISSN: 1726-0531, DOI: 10.1108/17260530710833202

 

A.O. Coker, R.A. Adeshiyan, J.R. Oluremi, M.K. Sridhar, M.E. Coker, C.A. Booth and J M Khatib (2008)“Challenges of Waste and Facilities Management in a Nigerian Leper Colony”,   International Journal of Environmental Studies, April 2008, Vol 65, No. 2, pp 177-189. ISSN 0020-7233 print    ISSN 1029-0400 online  doi: 10.1080/00207230701831202    

J M Khatib (2008) “Metakaolin Concrete at a Low Water to Binder Ratio”, Construction and Building Materials Journal, August 2008, Vol 22, Issue 8, pp 1691-1700. ISSN 0950-0618                    doi: 10.1016/j.conbuildmat.2007.06.003

             

J M Khatib (2008) “Performance of Self-Compacting Concrete Containing Fly Ash”, Construction and Building Materials Journal, September 2008, Vol 22, Issue 9, pp 1963-1971. ISSN 0950-0618                   doi: 10.1016/j.conbuildmat.2007.07.011   

 

O Kayali, M Naseer Haque, J M Khatib (2008) “Sustainability and Emerging Concrete Materials and their Relevance to the Middle East”, The Open Construction and Building Technology Journal, Vol 2, 2008, pp 103-110, ISSN: 1874-8368

 

R Siddique, J M Khatib and I Kaur (2008) “Use of Waste Recycled Plastic in Concrete: A review”, Journal of Waste Management, Vol 28, No 10, 2008, pp 1835-1852, ISSN 0956-053X          doi: 10.1016/j.wasman.2007.09.011    

 

J M Khatib, P S Mangat and L Wright (2008) "Sulphate Resistance of Blended Binders Containing FGD Waste ", Construction Materials Journal - Proceedings of the Institution of Civil Engineers (ICE), Vol 161, Issue CM3, August 2008, pp 119-128.   ISNN 1747-650X      doi: 10.1680/coma.2008.161.3.119

 

J Zhang and J M Khatib (2008) “Using wheat husk ash in the production of a sustainable construction material”, Real Estate and Development Economics Research (READER) Journal, Vol. 1, No. 1, pp 18-29, September, 2008, print ISSN 1754-3517    online ISSN   1754-3525   CDROM  ISSN   1754-3533

 

B Medani, S Kenai,  J M Khatib and A Ait-Mokhtar (2009) “Strength and Durability of Concrete Incorporating Crushed Limestone Sand”, Construction and Building Materials Journal, February2009, Vol 23, Issue 2, pp 625-633ISSN 0950-0618,   doi:10.1016/j.conbuildmat.2008.02.005

 

J M Khatib (2009) "Low curing Temperature of Metakaolin Concrete", American Society of Civil Engineers (ASCE) - Materials in Civil Engineering Journal, Vol 21, No. 8, August, pp 362-367, ISSN 0899-1561/2009/8-362-367    DOI: 10.1061/(ASCE)0899-1561(2009)21:8(362)

 

J M Khatib,  O Kayali and R Siddique (2009) “Strength and Dimensional Stability of Cement-Fly Ash-Metakaolin Mortar”, American Society of Civil Engineers (ASCE) - Materials in Civil Engineering Journal, Vol. 21, No. 9, September, pp 523-528,ISSN 0899-1561/2009/9-523-528, DOI: 10.1061/(ASCE)0899-1561(2009)21:9(523), CODEN: JMCEE7

 

R Siddique and J M Khatib (2010) “Mechanical properties and Abrasion Resistance of HVFA Concrete”, Materials and Structures - RILEM Journal,  Vol 43, No 5, June 2010, pp 709-718. print ISSN: 1359-5997   online ISSN 1871-6873        doi: 10.1617/s11527-009-9523-x

 

E M Negim, M Ramli, J M Khatib, B Saad, M I Saleh (2010), “Synthesis and Characterization of Hydrophilic Copolymers as Superplaticizers for cement Pastes”, World Applied Sciences Journal, Vol 10, No 6, pp 685-694. ISSN  : 1818-4952    http://idosi.org/wasj/wasj.htm

 

G True, D Searle, L Sear, J M Khatib (2010), “Voidage Assessment of Concrete Using Digital Image Processing”, Magazine of Concrete Research, Vol 62, No. 12, December, pp 857-868, ISSN 0024-9831, doi: 10.1680/macr.2010.62.12.857

 

J M Khatib, B A Herki (2011), “Capillary Water Absorption of Concrete Containing Waste Foundry Sand”, Concrete Plant International (CPI) Magazine, October, No. 5, pp 50-53, ISSN 1437-9023, www.cpi-worldwide.net

 

E M Negim, M Ramli, B Saad J M Khatib, L Bekbayeva, M Shalash, M I Saleh (2011), “Effect of Acrylate Copolymers on the Rheological Properties of Cement Pastes, Part II”, Middle-East Journal of Scientific Research, Vol 9, No 1, pp 8-16. ISSN  : 1990-9233    http://www.wassj.org           www. Idosi.org

 

J M Khatib, B A Herki, S Firat, B Menadi, S Kenai (2011), “Capillarity of Concrete Incorporating Foundry Sand a Replacement of Sand”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4,  pp 1224-1230, ISSN:1306-3111, ISSN: 1308-7231,  Article No. 1A0203, www.newwsa.com.

 

J M Khatib, L Wright and P S Mangat (2011), “External Chemical Shrinkage of Pastes Containing Flue Gas Desulphurisation (FGD) Waste”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4,  pp 1669-1675, ISSN:1306-3111, ISSN: 1308-7231,  Article No. 1A0272, www.newwsa.com.

 

J M Khatib, L Wright and P S Mangat (2011), “Influence of Incorporating Flue Gas Desulphurisation (FGD) Residues on Porosity and Pore Size Distribution of Cement Paste”, e-Journal of New World Sciences Academy (NWSA), Vol 6, No. 4,  pp 1676-1682, ISSN:1306-3111, ISSN: 1308-7231,  Article No. 1A0273, www.newwsa.com.

 

A OCoker, J R Oluremi, R A Adeshiyan, M K Sridhar, M E Coker, C A Booth, J A Millington, J M Khatib (2011), “Wastewater Management in a Nigerian Colony”, Journal of Environmental Engineering and Landscape Management, Vol 19, Issue 3, 2011, pp 260-269, DOI: 10.3846/16486897.2011.603500,  ISSN 1648-6897   ISSN 1822-4199 online,

 

J M Khatib, A Shaaban, S Negim, S Kenai (2011), “The Capillarity of Self-Compacting Concrete Incorporating Fly Ash”, Journal of Concrete Plant International, South African Journal for the Concrete Industry, pp54-60, Issue 6 (December), ISSN 1437-9023, www.cpi-worldwide.net

 

J M Khatib, S Negim, M Tarek Uddin (2012), “New Generation Water-Reducing Admixture for Concrete”,  The Master Builder, Indian Premier Construction Magazine, Vol 14, No 1, pp 142-149, January 2012, http://www.masterbuilder.co.in/

 

J M Khatib, S Baig, A Bougara, E S Negim, S Kenai (2012), “Utilisation of Foundry Sand in Concrete Production”,  The Master Builder, Indian Premier Construction Magazine, Vol 14, No 1, pp 244-246, January 2012, http://www.masterbuilder.co.in/

 

A Hadjsadok, S Kenai, L Courard, F Michel and J M Khatib (2012), “Durability of Mortar and Concretes Containing Slag with Low Hydraulic Activity”, Journal of Cement and Concrete Composites, Vol 34, Issue 5, May 2012, pp 671-677, ISSN 0958-9465. doi:10.1016/j.cemconcomp.2012.02.011

 

E M Negim, J M Khatib, K Al Mutairi, R Raikhan, M A Grigoriy (2012), “The Effect of Molar ratios of the Monomers on the Physico-Mechanical Properties of Portland Cement”, Middle-East Journal of Scientific Research, Vol 11, No 8, pp 1131-1139. ISSN  : 1990-9233    http://www.wassj.org           www. Idosi.org

 

J M Khatib, S Shariff, ES M Negim (2012), “Effect of Incorporating Foamed glass on the Flexural Behaviour of Reinforced Concrete Beams”, World Applied Sciences Journal, Vol 19, No 1, pp 47-51, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2012.19.01.2763

 

E S Negim, J M Khatib, M M Mohammed, S K Kerimbaevna (2012), “The Effect of Molar ratios of the Monomers on the Physico-Mechanical Properties of Portland Cement Mortar”, World Applied Sciences Journal, Vol 19, No 6, pp 832-837. ISSN 1818-4952, DOI: 10-5829/idosi.wasj.2012.19.06.2773

 

J M Khatib, L Wright, P S Mangat, E M Negim (2012), “Porosity and Pore Size Distribution of Well Hydrated Cement-Fly Ash- Gypsum Pastes”, American-Eurasian Journal of Scientific Research, Vol 7, No 4, pp 142-145. ISSN 1818-6785,   DOI: 10.5829/idosi.aejsr.2012.7.4.65131 

 

J M Khatib, E M Negim, H S Sohl, N Chileshe (2012), Glass Powder Utilisation in Concrete Production, European Journal of Applied Sciences, Vol 4, No 4, pp 173-176, ISSN 2079-2077, DOI; 10.5829/idosi.ejas.2012.4.4.1102

 

J M Khatib, E M Negim, E Gjonbalaj (2012), “High Volume Metakaolin as cement Replacement in Mortar”, World Journal of Chemistry, Vol 7, No 1, pp 7-10, DOI: 10.5829/idosi.wjc.2012.7.1.251    http://idosi.org/wjc/7(1)12/2.pdf

 

N Chileshe, J M  Khatib and M Farah (2013),  “The Perceptions of Tenants in the Refurbishment of Tower Blocks”, Facilities Journal, Emerald Publishing, Vol 31, Issue 3-4, pp 119-137.  ISSN: 0263-2772   DOI: 10.1108/02632771311299403

 

A B Herki, J M Khatib, E M Negim (2013), “Lightweight Concrete Made from Waste Polystyrene and Fly Ash”,  World Applied Sciences Journal, Vol 21, No 9, pp 1356-1360, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2013.21.9.20213

 

C Egenti, JM Khatib, D Oloke (2013), “Appropriate Design and Construction of Earth Buildings: Contesting Issues of Protection Against Cost”, African Journal of Basic & Applied Sciences, Vol 5, No 2, pp 102-106, ISSN 2079-2034    DOI: 10. 5829/idosi.ajbas.2013.5.2.1130

 

J M Khatib, L Wright, P S Mangat (2013), “Porosity and Pore Size Distribution of Cement-Fly Ash-Gypsum Blended Pastes”, Journal of Advances in Applied Ceramics, Structural, Functional and Bioceramics, Vol 112, No. 4, pp 207-201, online, ISSN 17436753, DOI: 10.1179/1743676112Y.0000000032

 

J M Khatib, A B Herki, S Kenai (2013), “Capillarity of Concrete Containing Foundry Sand”, Journal of Construction and Building Materials, Vol 47, October, pp 867-871, Elsevier http://dx.doi.org/10.1016/j.conbuildmat.2013.05.013,

 

B.A. Herki, J.M. Khatib  (2013)  “Lightweight Concrete Incorporating Waste Expanded Polystyrene”, Advanced Materials Research Journal,  Vol. 787, pp 131-137, Trans Tech Publications, Switzerland, ISBN print: 978-3-03785-802-8, doi:10.4028/www.scientific.net/AMR.787.131 

 

N Chileshe, J M Khatib and M Farah (2013), “The perceptions of Contractor’s and Landlord’s Representatives in the refurbishment of Tower Blocks”, Facilities Journal, Emerald Group Publishing, Vol 31, No. 11/12, pp 521-541, ISSN: 0263-2772   DOI: 10.1108/F-02-2012-0008

 

E S M Negim, J M Khatib, E Faizova, S Shilibekov, S Mussylmanbek (2013), “The Effect of Diamine Extender on the Properties of Polyurethane Dispersions”, Middle-East Journal of Scientific Research, Vol 16, No 7, pp 890-895, www.idosi.org ISSN 1990-9233 DOI: 10.5829/idosi.mejsr.2013.16.07.11936

 

E S M Negim, J M Khatib, G Zh Yeligbayeva, R Rakhmetullayeva, P I Urkimbaeva, M Sakhy, S Shilibekov, G A Mun, (2013), “Synthesis, Characterization and Application of Hydrophilic Copolymers on Physico-mechanical Properties of Cement Pastes”, World Applied Sciences Journal, Vol 25, No. 5, pp 1044-1052, ISSN 1818-4952, DOI: 10.5829/idosi.wasj.2013.25.07.13379    

 

J M Khatib, P S Mangat, L Wright (2013), “Early Age Porosity and Pore Size Distribution of Cement paste with Flue Gas Desulphurisation (FGD) Waste”, Journalof Civil Engineering and Management, Vol 19, No 5, pp 622-627, Taylor and Francis,  ISSN 1392-3730 print/ISSN 1822-3605 online,    doi: 10.3846/13923730.2013.793609 

 

M Sonebi, W Schmidt, J M Khatib (2013), “Influence of the Type of Viscosity-modifying Admixtures and Metakaolin on the Rheology of Grouts”, Chemistry and Materials Research Journal, Vol 5, pp 106-111. ISSN 2225-0956   http://www.iiste.org/Journals/index.php/CMR/index

 

B Menadi, S Kenai and J M Khatib (2014), “Fracture Behaviour of Concrete Containing Limestone Fines”, Proceedings of the ICE; Construction Materials Journal -, Vol 167, Issue 3, pp 162-170, June 2014, Paper 1200041 DOI: 10.1680/coma.12.00041.

 

S Kenai, B Menadi and J M Khatib (2014), “Sustainable Construction and Low Carbon Dioxide Concrete: Algeria Case Review”, Proceedings of the ICE; Engineering Sustainability Journal.Vol 167, Issue 2, pp 45-52, April 2014,      ISSN: 1478-4629         DOI: 10.1680/ensu.12.00024

 

J M Khatib (2014), “Effect of Initial Curing on Absorption and Pore Size Distribution of Paste and Concrete Containing Slag”, Korean Society of Civil Engineers (KSCE) Journal , Vol 18, Issue 1, pp 264-272 January. pISSN 1226-7988, eISSN 1976-3808       DOI 10.1007/s12205-014-0449-7

 

N Zhansaya, E S M Negim,  A M Rauash, J M   Khatib, G A Mun, C Williams (2014), Effect of pH on the physico-mechanical properties and miscibility of MC/PAA blends,  Carbohydrate Polymers Journal,  Elsevier, Vol 101, pp 415-422, http://dx.doi.org/10.1016/j.carbpol.2013.09.047

 

B Menadi, S Kenai, S Hammat, J M Khatib (2014), “The Influence of the Fineness of Mineral Additions on Strength and Drying Shrinkage of Self-Compacting Mortars”, Key Engineering Materials Journal,  Vol. 600, pp 367-374, Trans Tech Publications, Switzerland, ISSN: 1662-9795    doi:10.4028/www.scientific.net/KEM.600.367

J M Khatib, E M Negim, G Zh Yeligbayeva, G A Mun (2014), “Strength characteristics of mortar containing high volume metakaolin as cement replacement”, Research and Reviews in Materials Science and Chemistry Journal, Vol 3, Issue 1, pp 85-95, Jyoti Academic Press, ISSN: 2319-6920,  www.jyotiacademicpress.net

 

J M Khatib, P S Mangat, L Wright (2014), Pore Size Distribution of Cement pastes Containing Fly Ash-Gypsum Blends Cured for 7 Days, Korean Society of Civil Engineering (KSCE) Journal, Vol 18, No 4, pp 1091-1096,; DOI: 10.1007/s12205-014-0136-8        Online ISSN: 1976-3808; Print ISSN: 1226-7988

 

El-Sayed Negim, Latipa Kozhamzharova, Jamal Khatib, Lyazzat Bekbayeva, and Craig Williams (2014), “Effects of Surfactants on the Properties of Mortar Containing Styrene/Methacrylate Superplasticizer,” The Scientific World Journal, Vol. 2014, Article ID 942978, 10 pages. doi:10.1155/2014/942978

 

D Boucherit, S Kenai, E Kadri, J M Khatib (2014), “A Simplified Approach for the Prediction of Long Term Concrete Drying Shrinkage”, Korean Society of Civil Engineering (KSCE) Journal, Vol 18, No. 4,pp 2196-2208,                   DOI: 10.1007/s12205-014-0168-0             Online ISSN: 1976-3808; Print ISSN: 1226-7988

 

C Egenti, J M Khatib, D Oloke (2014), “Conceptualisation and Pilot Study of Shelled Compressed Earth Block for Sustainable Housing in Nigeria”, International Journal of Sustainable Built Environment, Vol 3, No. 1, June, pp 72-86,  ISSN: 2212-6090, DOI:  10.1016/j.ijsbe.2014.05.002, http://www.journals.elsevier.com/international-journal-of-sustainable-built-environment/

E S M Negim, R K Rakhmetullayeva, G Zh Yeligbayeva, P I Urkimbaeva, S T Primzharova, D B Kaldybekov, J M Khatib, G A Mun, C Williams (2014) “Improving biodegradability of polyvinyl alcohol/starch blend films for packaging applications”,  International Journal of Basic and Applied Sciences, Vol 3, No. 3, pp 263-273, Science Publishing Corporation, www.sciencepubco.com/index.php/IJBAS, doi: 10.14419/ijbas.v3i3.2842

 

K. Ontürka, S. Firat, I. Vural, J. M. Khatib (2014), “Improvement of Road Sub-base Fill by Using Waste Marble Dust and Fly Ash”, Journal of Polytechnic, Vol. 17, No. 1 (Special Issue), pp.35-42, (in Turkish), DOI : 10.2339/2014.17 Sayı 1, 35-42    ISSN: 2147-9429     http://www.politeknik.gazi.edu.tr/index.php/PLT/issue/view/71

 

El-Sayed Negim, Latipa Kozhamzharova, Yeligbaeva Gulzhakhan, Jamal Khatib, C. Williams, and Lyazzat Bekbayeva (2014), “Effect of copolymer latexes on physico-mechanical properties of mortar containing high volume fly ash as a replacement material of cement”, The Scientific World Journal, Vol 2014, Article ID 670710, 11 pages, 31August2014   http://www.hindawi.com/journals/tswj/aip/670710/

 

K Henni-Chebra, A Bougara, J M Khatib (2014), “Using Metal Plates for Measurement of Cement Dust Emission”, Proceedings of the ICE; Engineering Sustainability Journal. Vol 167, Issue 5, pp 208-215, October 2014,        ISSN: 1751-7680     DOI: 10.1680/ensu.14.00004

 

G True, D Searle, J M Khatib (2015), “Digital imaging 2D and 3D particle assessment using a flat-bed scanner, Magazine of Concrete Research, Vol. 67, No. 19, pp 1033-1047, DOI: 10.1680/macr.14.00352      http://www.engii.org/cet2015/OrganizingCommittee.aspx

 

M. Sonebi, E. Garcia-Taengua, K.M.A. Hossain, J. M. Khatib, M. Lachemi (2015), “Effect of nanosilica addition on the fresh properties and shrinkage of mortars with fly ash and superplasticizer”, Construction and Building Materials, 1June 2015, Vol 84, pp 269-276

 

O Ahiakwo, D Oloke, S Suresh, J M Khatib (2015), “Implementing the last plannerTM system in a road construction project in Nigeria”,  Built Environment Journal, Vol 12, No. 2, July, pp 33-49, ISSN 1675-5022

 

C. Egenti, J. M. Khatib (2015). “Behaviour of Shelled Compressed Earth Masonry Unit under Load”. International Journal of Civil and Structural Engineering Research, Vol 3, No. 2, pp 70-73.   http://www.researchpublish.com/download.php?file=Behaviour%20of%20Shelled-2537.pdf&act=book.

 

J M Khatib, L Wright, P S Mangat (2016), " Effect of desulphurised waste on long-term porosity and pore structure of blended cement pastes”, Sustainable Environment Research Journal, http://ser.cienve.org.tw; DOI: 10.1016/j.serj.2016.02.002, Ref. SERJ39, Manuscript ID SER2014-082; http://ser.cienve.org.tw, Accepted 5 Feb 2016. Received at Elsevier 10 June 2016.

 

Deinsam D Ogan, Issaka E Ndekugri, Chike F Oduoza, Jamal M Khatib (2016), Principles for developing an effective framework to control minerals and rocks extraction impacts, mitigate waste and optimise sustainable quarries management, Resources Policy Journal, Vol 47, pp 146-170, http://dx.doi.org/10.1016/j.resourpol.2016.01.004

J M Khatib, L Wright, P S Mangat (2016), “Mechanical and physical properties of concrete containing FGD waste”, Magazine of Concrete Research, Vol 68, Issue 11, 1June2016, pp 550-560, ICE Publishing, DOI: 10.1680/macr.15.00092  ISSN: 00249831 

B A Herki, J M Khatib (2016), “Valorisation of waste expanded polystyrene in concrete using a novel recycling technique”, European Journal of Environmental and Civil Engineering, Taylor & Francis pub, Accepted 22 March 2016 http://dx.doi.org/10.1080/19648189.2016.1170729    ISSN: 19648189